Vista/Win7 ADSL local connection is limited

Unidentified network start (if this can be skipped normally), click on the customization below to see if it is public? Change to special-> Next-> Close (as shown below), OK, etc. After a while, there will be a window to choose the network situation, what family can be selected, what company, this depends on the individual's needs. (The icon can be changed at any time, the method is to customize after normal -> change).

It will take a while for it to take effect, because the computer should automatically detect it, use this time to set the IP.
Click on the broadband and local view status respectively, and then select their IPv6 options (see below) Figure), this is due to the consideration of boot speed, or it will automatically get the IP segment that doesn't touch us every time it is turned on. It is a waste of time. (The education network should not be closed, other vast Telecom Netcom users should be closed, this technology is too far away from us)

IPv4 settings as shown below, IP address: 192.168.1.2 (to set this, because the machine's IP address and the gateway behind On an IP segment), the subnet mask is automatically assigned 3 255 and 0, and the address is: 192.168.1.1 ( Is the default),

About the following 2 DNS servers IP is changed according to the location, each province or municipality has its own IP segment, it is recommended to use EVEREST Ultimate to view the next (can go霏凡download, this is the link to the download page), open it and click on the network device -> Windows network, check the network configurator address one. You can clearly see it, then fill them into the preferred and alternate DNS respectively.
This is almost the same, restart the computer, see, if the connection is still limited connection, open IE, enter 192.168.1.1 in the address bar, enter, and actively access our ZTE ZXDSL831B ADSL Modem Well, it’s solved, it’s perfect!
Not yet, can’t say that this is perfect, the local connection has become restricted after the restart, and why do we have 2 network settings? Why? Can't have only one? The answer is of course. And it's easy to add happiness. The effect is as shown in the

method is to click on a custom, then click to merge and delete the network location, (pictured)

Then check the ADSL broadband connection and local connection, point merge, and then In the window, select the broadband connection, merge (that is, merge the local connection into the dial-up broadband connection). This will not cause the connection restricted prompt.