windows7 system default sound and microphone sound are relatively small, you may often convert back and forth between xp and win7 system, you will find that the sound and microphone sound in xp system is bigger than win7 system . But the win7 system also offers adjustment options that allow us to easily adjust the volume of the sound and microphone. Today I will elaborate on how I can adjust the volume of the microphone to the maximum.
First, switch to the tray area in the lower right corner of the system. as the picture shows. Right click on the icon of the system sound and select the recording device from the pop-up menu.
In the recording device, the recording tab, the system's microphone is displayed. The green part on the right is the position where the volume is displayed. If you shout at the microphone, the green strip on the right will change. High, you can determine the volume according to the height of the green square.
If you want to adjust the volume, right click on the icon of the microphone and select the Properties option. Go to the property page of the microphone.
In the properties page of the microphone, the default is under the regular tab, there is a label called level, click on the level label with the mouse, and switch to the level label setting page. as the picture shows.
Under the level label, two adjustment options are provided, one is the basic volume adjustment of the microphone, and the lower one is the adjustment of the volume enhancement. The difference is that the basic adjustment above can be adjusted to the maximum program. The sound quality is guaranteed, but the volume is not too large even if it is adjusted to the maximum. Adjusting the one below can easily adjust the sound to a large size, but at the same time there will be noise. Therefore, the principle is that the above adjustment is larger, and the following is only adjusted to increase by 10 decibels.
In fact, the sound of the microphone is not the biggest, we can also start from the microphone driver software to adjust the sound to the maximum. First of all, you have to install a sound card driver. This software will usually be available on the computer. If not, you can download a driver software to install it. After installation, open the control panel and find the option shown in the control panel, the driver for the sound card. Click to open.
In the interface of the driver software, we switch the label setting to the column of the microphone. Here, there is also a volume setting option, the first slider, which is adjusted to make it At the far right, the volume of the system microphone is now adjusted to the maximum. Because the default microphone driver is not in the loudest state, we can set it to the maximum in the driver software to maximize the volume potential of the microphone.
Notes
Do not make the microphone too large, because the sound will be distorted and the hardware will be damaged.
In the adjustment of the volume enhancement, the larger the adjustment, the louder the sound of the microphone, but it sounds the most blurred. When it is adjusted to the maximum, it sounds very loud, but it is basically not heard. It is the original sound of someone, and the distortion is very large.
Some people may not have sound driver software in their computer. You can download the latest driver software according to your own sound card hardware. You can use hardware detection software to detect the hardware model and brand of your sound card and microphone. .