0xc000000e error failure under win7

When the computer encounters a surprise event, the bootloader of Windows system will not work properly. Win7 cannot start normally and report "0xc000000e" error at the same time. If we encounter 0xc000000e error, we cannot enter safe mode. In the following, the author can solve the error of 0xc000000e without reinstalling the system.



0xc000000e error
First set the U disk as the first boot device by modifying the BIOS, then use the U disk version of WinPE to boot the system and run the command prompt tool under WinPE system; Enter the following DOS commands in turn (press the Enter key for each DOS command):
cd c:windowssystem32
bcdedit /set {default} osdevice boot
bcdedit /set {default} Device boot
bcdedit /set {default} detecthal 1
The meaning of these sentences: 1, switch to the "C: WindowsSystem32" directory (c disk for the system disk)
2, set the Windows7 where The hard disk partition is the default
3, set the partition where the Windows 7 boot file is located as the default
4, start the computer from the default location.

After completing the above operation, you can log in to Windows7 after restarting the system. This is simpler than installing the system. If you have encountered such a startup failure during the process of using Windows 7, you can also try to use this method to solve the error of 0xc000000e.