USB Disk Installation Windows 7 Operation Guide

It is well known that Windows 7 has very low hardware requirements for computers, not only far lower than Vista systems, but some users even find that installing Windows 7 requires less hardware than Windows XP. So many netbook users also want to install Windows 7 on their own machines. In fact, Windows 7 can also run smoothly on a low-profile netbook, but some netbook users are depressed because they can't install Windows 7 without a DVD drive. In fact, you don't have to be frustrated, because we can still install Windows 7 without a DVD drive. We only need a 4GB USB flash drive. After testing, installing Windows 7 using a USB flash drive is faster than using a DVD drive.

Don't worry! The following small series will slowly tell you the installation method:

1. First we need to find a 4GB USB flash drive and plug it into the netbook.

2. Open the “Start Menu” in the lower left corner of the screen, then run the “cmd” command, and you will see a control window pop up.

3. Then enter the following in the window:

* First type ‘diskpart’ command;

* ‘list disk’:type the command system will Automatically list all the disks found on your computer, including the USB drive we just plugged in.

* At this point you can see the number corresponding to the USB flash drive (such as #), then type: ‘select disk #’;

* Then type ‘clean’;< Br>

* Type ‘create partition primary’;

* Then enter ‘select partition 1’;

* Enter ‘active’;

* Enter ‘format fs=fat32 quick’.

The whole operation steps can refer to the following figure:

Here you can copy the Windows 7 installation files to the USB flash drive, and then you need Windows 7 The ISO file is installed as a virtual DVD. It is very simple. You can follow these steps:

1. First install a free software MagicDisc, which is used to create and manage virtual CD-ROM drives, of course. You also know that other such software can also choose other, here we use this free software.

2. After the MagicDisc installation is complete, it will appear in the system tray. At this point, right click on MagicDisc and select ‘Virtual CD/DVD-Rom’ to set up the DVD drive.

3. Then click ‘Mount’ will bring up a dialog window for you to select the Windows 7 ISO image file.

4. In Windows Explorer, you can see all the Windows 7 installation files by opening the DVD drive you just set up. All you need to do is copy and paste all these files into the USB flash drive. So you have a Windows 7 installation U disk.

As long as you will install the Windows system yourself, you will be done here. Whether you want to install Windows 7 on any of your own computers, you can insert this Windows 7 installation USB disk. No need to use a DVD drive. Yes, Xiao Bian also reminds you that when using this U disk to install Windows 7 system, don't forget to enter the BIOS after rebooting the computer to change the system's preferred boot device to a USB external device!