Hardware problems cause win7 Ultimate system crashes

1. Especially when the summer is coming, the weather is hot. If the temperature of the accessory is too high, it will cause a crash and do a good job of cooling.

2. In the case of small memory Under (less than 128M), it is best not to run software and games that use more memory or run multiple programs at the same time, which will lead to insufficient physical memory, causing crashes;

3, today's CPU and display Because the card adopts a new technology, it has good overclocking performance, but overclocking can easily cause the instability and even crash of the win7 system (the hardware is temporarily damaged). For the crash caused by overclocking, it should be down-clocked or restored in time. Its rated working frequency to ensure the stable operation of the computer;

4, before upgrading the motherboard or the BIOS of the display card, be sure to determine whether the version number of the BIOS to be upgraded matches the model of the board. It is strongly recommended to back up the original version, just in case;

5, there will be a lot of dust in the air. After using it for a long time, a lot of dust will accumulate in the chassis. At this time, it should be cleaned up in time. Heavy impact on heat dissipation, and dust will cause short circuit when it touches the circuit board circuit, causing crash;

6. When replacing the computer components of win7 system, after installation, be sure to check it again to see if the hardware is Has been inserted to prevent contact failure caused by crash;

7, sometimes due to the conflict between the various hardware caused by win7 system blue screen of death, then you can try to refresh the new version of the BIOS for the board, update the driver The program or change the interrupt number of the device in the system, if it is not possible, replace the hardware.