Win7 system installed Cheetah browser led to computer blue screen code 0x000000F4 how to solve

Computer Blue Screen 0x000000F4 Cause Analysis: When the Windows 7 operating system is installed on a slave hard disk configured and no other device is connected to the same IDE controller channel (primary or auxiliary channel), 0x000000F4 will occur on the computer. The problem, when using the win7 system with some motherboards, this behavior may also occur;

Solution:

1, start with soft, such as running Mo software Error, it is recommended to reinstall the software, generally can be solved;

2, for Parallel Advanced Technology Attachment (PATA) hard disk, configure the disk drive to be used only as the primary drive, for Serial Advanced Technology Attachment (SATA) Hard disk, connect the hard disk cable to the main channel SATA connector on the motherboard;

3. Connect another device as the primary drive, such as another disk drive, CD drive, or DVD drive;

4, check whether recently reinstalled or upgraded the driver or BIOS, it is likely that the driver is not compatible, uninstall the original driver can be reloaded;

5, try to replace the PATA and SATA IDE cable, even if it does not look worn;

6, install Windows on the new hard drive, because your hard drive or Windows installation may be damaged;

7, check the hard drive data cable, try to replace the data cable to try;

8, mainly check the memory, check the memory metal strip is oxidized, if you install more than two memory, remove one or Change the memory slot.