Radish Home Win7 System Startup Solution

Although the Win7 system is much more stable than previous versions of Windows, there are various startup failures due to the installation of some special software or misoperations. Next, let's analyze the cause of the common startup failure of the radish home Win7 and how to solve the related startup failure.

Fault 1: MBR fault

Fault performance: Similar to "press F11 start to system restore" after booting. Error analysis Cause analysis: Many software such as one-click Ghost, in order to achieve priority The purpose of the startup is to modify the hard disk MBR during installation, so that the corresponding startup menu information will appear at the time of booting. However, if such software is defective or incompatible with Win7, it is very easy to cause the radish home Win7 to fail to start normally.

Solution: For the repair operation of the hard disk master boot record (MBR), you can easily solve this fault by using the repair tool ——Bootrec.exe that comes with the win7 Ultimate installation CD. The specific operation steps are as follows: first start the computer with the radish home Win7 installation CD. When the CD is booted, press Shift+F10 to bring up the command prompt window and enter the DOS command “bootrec /fixmbr” (see Figure 1). Then press the Enter key and follow the prompts to complete the rewrite operation of the hard disk master boot record.
Fig. 1

Fault 2: Oxc000000e fault http://www.windows7en.com/sdjswin7/

Fault performance: The system cannot be logged in normally when booting, but pops up directly The Oxc000000e fault prompt shown in 2.

Analysis of the cause: Due to the installation or uninstallation of some special software, it will cause very serious damage to the boot program of Radish Home Win7, so the win7 flagship will have Oxc000000e error when starting, which will not be normal. Start the system. In

National Computer Rank Examination Preparation Materials Computer Level Examination Computer Level Two Computer Three Level Examination Computer Level 4 Examination

In this case, pressing the F8 shortcut key will not bring up Win7. The advanced boot menu, of course, cannot be repaired in safe mode.
Fig. 2

Solution: Execute the following five DOS commands in the cursor position of the window shown in Figure 1 (Figure 3, C drive is the system disk installed by win7 Ultimate, the same below): c:

cd windowssystem32

bcdedit /set {default} osdevice boot bcdedit /set {default} device boot bcdedit /set {default} detecthal 1

Tips: If you do not have the radish home Win7 installation CD, you can also enter the above five DOS commands in the WinPE environment.
Fig. 3

Fault 3: BOOTMGR is missing error when booting

Fault performance: Whenever you turn it on, the error message shown in Figure 4 will appear, and it will not work properly. log in system. The error message, translated into Chinese is Bootmgr lost, press Ctrl+Alt+Del to restart.
Figure 4

Cause Analysis: The cause of this startup failure, or because the Bootmgr file is indeed lost, is the most common; another possibility is due to a disk error.

Solution: If the Bootmgr file is missing, you can use the method of rebuilding the radish home Win7 boot file to solve the problem. The operation steps are as follows: execute the following two DOS commands in the cursor position of the window shown in Figure 1: C:

bcdboot C:windows /s C:

Then restart the system, you can See the familiar boot menu of Radish Home Win7, and then choose the first win7 Ultimate menu option. After some initialization, we can use the Radish Home Win7 system normally.

If you still can't solve the problem after the above steps, then the fault is probably caused by a disk error. At this time, you can try to run the chkdsk /f command in WinPE environment, and the fault can be obtained. Very well solved.

Fault 4: BOOTMGR is compressed error when booting

Fault performance: This fault is similar to "BOOTMGR is missing", it is also unable to log in to the system and will only appear "BOOTMGR" Is compressed” error prompt (Figure 5).
Figure 5

Cause Analysis: The cause of this failure is caused by the compression of the system disk.

Solution: Start the system with WinPE, run its own command prompt tool and execute the following DOS commands in sequence: c:

cd windowssystem32 compact /u /a /f /i /Sc:*

After executing the above DOS command, the command prompt tool will start the complete decompression of the C disk file, and then restart the system, you can log in to the radish home Win7 system. . (This article is taken from http://www.windows7en.com/Win7/19046.html)