How to set up Windows 7 ADSL network connection?

The basic method of network configuration for Windows 7, due to space limitations, does not elaborate on the most commonly used ADSL network connection settings and dialing settings. This article is devoted to this (adding a lot of pictures and trying to be more detailed).

First, the setting method of Windows 7 ADSL network connection.

Many home users and small business users basically use ADSL to access the Internet, so let me make a special note:

1. Connect the model to computer ——router—— ADSL MODEM LAN mode connection settings

A, in the control panel & mdash; & mdash; network and sharing center, set the current network type (usually choose the working network), IP address if not special needs No need to set up (the company's office generally considers the allocation of IP addresses in consideration of sharing needs), the router will automatically assign the runtime IP address (usually the internal network address) to the computer. As shown in Figure 1 (middle part):

B. Configure ADSL automatic dialing function for the router

Method: Power on the router, open the IP address of the router in the browser input (usually 192.168.1.1, you can enter ipconfig in the running CMD to view the IP address of the gateway), enter the login account and password of the router (usually admin), the general management interface of most household or small commercial routers is similar to the following Figure 2:

The above picture shows the screenshot of the management interface of TP-LINK R402. You can enter the online account number and password in the network parameter ——WAN port settings (Telecom or Netcom will leave it for you when you install it) Under the bottom, choose automatic connection, so that each time the router and ADSLMODEM are powered on, the ADSL login network will be automatically controlled, without manual intervention. Other router settings are similar.

C. After setting up, just confirm that the router can connect to the network normally, then Windows 7 basically does not need to be set up. In the early days of Windows XP, every time you have to create a network connection, it seems that Windows 7 is also saved, the default is all done by the operating system.

2, connected model computer & mdash; & mdash; ADSL MODEM ADSL computer dialing settings.

For friends who don't have a router, you need to make PPOE dialing settings on Windows 7. The setting method is as follows:

A. In Figure 1 ——Change network settings —&mdash ; Click to set up a new connection or network. Then select the first item "Connect to the Internet" (below Figure 3)

Since the machine is connected to the network, the following interface appears (Figure 4 below):

We select “ Still need to set up a new connection, (Figure 5 below):

Select the broadband PPOE connection (Figure 6 below):

Enter your online account number and password. Incidentally, many notebooks are equipped with a wireless network card and a wired network card. For example, if you use a wireless network card, you can switch to the wireless network by setting the wireless (W). The configuration method is similar.

Second, Windows 7 normal MODEM phone dial-up connection setting method

1, the connection model is computer & mdash; — ordinary MODEM phone dialing method

using analog dialing The friend may not be too much now, but I will introduce it. In the above figure 6, select the dialing (D) option (of course, you must first turn on or enable the MODEM), and Figure 7 below appears.

Enter your phone number, username and password to create a MODEM dial-up connection.

Xiaobian Tip: In Figure 1, many functions of Windows 7 network settings are cross-interconnected, and multiple different locations can reach the same settings. For example, ordinary dial-up users can directly dial the settings in Figure 3. The connection can be set up, and it can also be set to MODEM dial-up by dialing directly to the workspace <;—— the result is the same, but the location is different.

What are the practical methods for installing Windows 7 from the hard disk

Keywords: hard disk installation, installation system

Method 2, using Windows 7's own startup files and repair functions :

A, the ISO image of Windows 7 is extracted to the D disk with ultraISO (such as D:Win7);

B, bootmgr and boot, EFI, source in D: Win7 directory Copy to the root directory of the C drive, prepare the file for Windows 7 boot;

D, enter C:bootbootsect.exe /nt60 C: at the cmd command prompt of Windows Vista, excluding C : After the comma, the prompt "successful" means that the repair boot is successful (the boot right is transferred to the Windows 7 startup file);

E, close the command window and restart the computer, automatically enter the windows 7 installation interface, select Install the language, set the time and keyboard, etc.;

F, appears & ldquo; start the installation interface & rdquo;, Tian Yuan special reminded not to click here & ldquo; now install & rdquo; but click on the lower left corner & ldquo; repair computer ”, enter "system recovery selection", select the most A " ", the command prompt, enter the DOS window. We have a big circle in order to save a boot disk and finally enter DOS;

G, input "D:Win7sourcessetup.exe", do not quotes, start to install Windows 7;

H , select the language and keyboard settings, format the C drive, start to install Windows 7;

3, the original operating system is Windows 7 hard drive new installation windows 7 method:

A, put Windows 7 The ISO image is extracted to the D disk with ultraISO (such as D:Win7);

B, press F8, select "repair system", select keyboard, enter administrator password, select the last command Fix (Command Prompt);

C, input "D:Win7sourcessetup.exe", do not quotes, start to install Windows 7;