Windows7 can not start prompt hal.dll damaged or lost how to solve?

Windows7 can not start prompt hal.dll damaged or lost how to solve? Recently, a Windows 7 user has booted the system and prompted hal.dll to be damaged or lost, causing the system to fail to boot. Why is the hal.dll file corrupted or lost? How to solve the damage or loss of hal.dll? Don't worry about the little friends, the following small series will share with you the reasons and solutions for Windows 7 failure to start prompting hal.dll corruption or loss.

Windows7 reasons prompted hal.dll damaged or missing can not start there: cause

1, ghost system, ghost original packaging and brand host file system partition type does not cause together ( Most of the brand computers have hidden partitions;

2, after the accidental system is abnormally shut down, the boot can not be started, use the system repair disk repair prompt system32\\\\hal.dll this file is damaged or lost; >

3, overclocking may also cause system file corruption, indicating system32\\\\hal.dll is damaged or lost;

4, is a memory failure, pull the memory strip to wipe off the dirt on the gold finger Check if you plug it in and try again, or find a way to ensure that the normal memory module is installed before testing, to eliminate the problem of the memory stick!

Windows7 can not start the prompt hal.dll damaged or lost solution:

1, can not start prompt hal.dll damaged or lost, in fact, the file may not necessarily be said in the system Does not exist, and according to the system prompts, copying a hal.dll file to system32, can not be resolved.

2, the main reason for this error is the boot.ini file error, resulting in the computer can not boot from the specified path, then the system will search for other paths, and other paths do not exist or there is no hal. Dll file, so this error will be prompted.

3, for example, the system disk is installed to the C drive, if the boot.ini file format in the root directory of the C drive is incomplete, the system defaults from C:\\Windows, but also because of boot.ini The file format is incomplete and illegal. The system will determine that your Windows is not installed on the C drive, so the system prompts that the hal.dll file cannot be found, causing the startup to fail. The solution is to re-edit the boot.ini file.

4, use the dos boot disk to start, enter the dos interface, use the dos tool edit.exe command to edit this file, start edit.exe, open boot.ini, edit the boot.ini file in the correct format The content can be saved as a boot.ini file.

5, using the recovery console inside the bootcfg command, use the Windows Recovery Console, repair boot.ini with fixboot command, if the failure to use bootcfg /add to rebuild boot.ini. After

6, if not cold dos command interface, you can create a good right boot.ini on another computer, and then copied to the computer failure root directory of C source file that is covered can.

7, how copy it? Still use dos, you can not remove the hard disk of the faulty computer, copy it when hanging on another computer, the best way is to edit boot.ini from other computers, use a u disk boot. Ini copy, then copy a hal.dll file.

8, then plug in the computer failure, use a boot disk and load the driver support u disk, enter the dos interface, and then enter the u disk directory to see the hal.dll and boot.ini file it, Then use the dos command:

copy hal.dll c:\\windows\\system32\\hal.dll

copy boot.ini c:\\

About Windows7 can not start prompt hal The cause and solution of .dll corruption or loss will be shared here. If you also encounter damage or loss of hal.dll file, try it according to several methods described in the small series. Basically, you can solve your problem. problem.