What should I do if the "0x000000F4" blue screen code appears on the Windows 7 computer?

In our daily use of the computer, occasionally there will be blue screen problems. Every time there is a blue screen problem, there will be a blue screen code. We can also find the corresponding solution through this code. Now a Windows7 system user has encountered the problem of blue screen code 0x000000F4. How can we solve the problem of 0x000000F4?

Check the system software

1, first talk about the reasons of this code appears: This code means that memory access error. That is to say, because of the blue screen phenomenon caused by the error in the data in your memory, we can point the problem to our computer memory.

2, if the blue screen code is naturally the first time, that first do not worry, there is likely to be out of memory and other computer systems and software problems, usually after the restart, no problem.

3, the following is to say that this code often appears: Recall whether recently reinstalled or upgraded the driver or BIOS, or installed some software, if any, restore the old driver uninstall related software Just fine. (Software conflict may cause a blue screen)

Check your hardware

1, if the code is still there, then it is likely your computer hardware problem resolved as follows: open computer The outer casing on the side of the mainframe. (Do not forget the power outage)

2, pull out the memory (memory of understanding it, please refer to the first deputy picture), wipe with a rubber. (There may be a thin rust Gently sand)

3, replace the memory, covered with the cover.

4, if the appeal is still there the code, it may be a computer motherboard or memory corruption, need to replace the corresponding hardware computer shop.

If you are using a computer that is older, it is normal to have this problem, but if the new computer has this problem, it is a bit abnormal. It is recommended to check if the hardware is pirated or Second-hand.