PXE boot installation Windows7 principle detailed

If you want to install the system, what method would you choose? This problem is very easy to solve, but if you want to ask if you want to install more than one computer at a time, I believe that many people can't answer it. Many companies in the company have to install Windows 7. It is too much trouble to install one on the other! In fact, as long as the computer supports PXE boot, we can start PXE for Windows 7 network installation of multiple computers through any normal computer. , convenient and fast, even the CD does not need.

PXE starts to install Windows 7 principle

First, talk about PXE boot. PXE (preboot execute environment) is a boot technology developed by Intel Corporation. It works in the network mode of Client/Server and supports workstations to download image files from remote servers through the network, and thus supports the startup process of the operating system from the network.

At present, the computer's network card almost supports PXE booting. Generally, there is a similar "PXE boot" in the BIOS boot settings, which means that PXE boot is supported. We only need to configure the boot parameters and the genuine Windows 7 installation shared image on the server (there are ways to make it later). After the client starts, you can install Windows 7 through network mapping.

Two small software to build a network server

Download "deep remote boot manager" and "small strong PE toolbox PXE version" two small software. The Deep Remote Boot Manager is deployed on the server side to remotely boot the client computer and assign IP, while transferring the required boot files. The Xiaoqiang PE Toolbox PXE version is used for the operating environment after the network startup (WinPE). It has been integrated with Ghost32 and automatically maps the shared resources of the server after startup.

Follow the prompts to install "Little Xiaoqiang PE Toolbox PXE Edition" to ""C:\\ZJQPXE”, after installation is complete, close the "WinPE PXE Special Edition Server Settings" window, use it yourself" Deep Remote Boot Manager & rdquo; configuration.

Unzip the Deep Remote Boot Manager to "C:\\ ZJQPXE”, run“C:\\ ZJQPXE\ etbootM.exe”, click “Configure →Option Settings” In the "Startup Configuration" option, the working directory selects "C:\\ZJQPXE", and the boot file selects “pxelinux.0”. At this point, the web server is set up.

<;ImageX”Creating Mirrors

After completing the server setup, we will create a GHO file and then run “>Ghost32” on the client that is launched to perform a quick recovery.

Start the installation of Windows 7 computer, enter Windows 7 and right click on the desktop "Computer", select "Manage", and then expand "Computer Management & Rarr; Storage & Rarr; Disk Management", then Right-click "Disk Management" and select "Create VHD", follow the prompts to create a "Windows 7.vhd" file, and complete the VHD hard disk initialization and formatting. Select this partition in Disk Management and select “ Mark Partition as Active Partition.

Prepare the Windows 7 Genuine Installation CD, start the command prompt as an administrator, and type "L:\\boot\\bootsect.exe /nt60 N:” (L: is the letter of the CD) , change the N disk boot record to NT60 format. Run "ImageX One Click Recovery" software, click "Partition Recovery", select the VHD disk created above, select the "Mirrors" option on the installation CD, "sources\\install.wim", follow the prompts to the flagship The version of the image is released to the VHD disk.