Novice tutorial: win 7 hard disk partition method analysis

Now everyone will install the system for their own computer, but sometimes you need to partition the hard disk, especially the system installed now is win7 system, then what is the step to partition the hard disk under win 7 system? To pay attention to what issues, please see the following:

The first question: New partition tutorial:

First enter "Disk Management".

There are two ways to enter:

1) Right-click on the computer ----------Disk Management;

2) Start--Search Procedure And enter the file and "Computer Management" - Computer Management - Disk Management

After opening the virtual disk management, you can see that this computer has 4 partitions: Needless to say, the C drive is the system drive. Is the primary partition; the D drive is also the primary partition. My machine is Dell, and the system recognizes two primary partitions. This is the case, if you use the main partition D disk partition, then the new third partition must also be the primary partition, because there are already two primary partitions, the system does not allow a third primary partition, so you can not use the C drive And D drive to divide the new partition. Then I want to increase or decrease the space of the C drive or D drive? Do not be dry, the final post of the post must be specially stated!!!

The F drive and the E drive are logical partitions. Since the system does not limit the number of logical partitions, you can use F or E to create a new logical partition.

Scan with your eyes, F disk is bigger, use F disk as an example to explain how to partition.

Right-click on the F drive box and select “Compress Volume”.

In the dialog box below, the whole F disk is about 73.94G, which contains a lot of movie files, only 4 more G free space, so I assume To create a new 2G logical partition, enter 2048 (unit: MB) in the “Enter Compressed Space” box, just 2 G, the input number should never be greater than “ the available compressed space size & ldquo; inside The number, otherwise you can't operate the next step. Click “Compress”.

Note: If my F drive is an empty 73G disk, then the new partition should not be more than half of the original F drive, that is, do not fill in the option of "compressed space" The number of 36.5G, otherwise it may not be completed. Adjust the size of each partition and finally explain.

Partitioning the hard disk is not a very difficult operation, but sometimes it is inevitable. Therefore, everyone can learn the hard disk partition while learning to install the system. I hope it will help everyone.