Win7 boot prompt "network IP address conflict" how to do?

A recent Win7 user feedback, when using the company's LAN, as long as the computer is turned on, a network error message will appear, the content is displayed as: "Windows detected an IP address conflict", what is going on? ? Don't worry, the following small series will give you a detailed explanation of the causes and solutions of the problem. The reason

produced:

company in order to facilitate the management of network security, and will normally be provided for each computer to use a static IP, which is the IP corresponds to a user name, once your IP If there is any abnormal activity, you will immediately know who the computer is, so there may be an IP conflict caused by filling in the error!

Solution 1: Manually modify IP

Since your IP has been occupied by other computers in the company, you can only set one more!

1, click the Start button, select & ldquo; & rdquo control panel; enter;

2, go to Control Panel, select Network and internet following & ldquo; View network status and tasks & rdquo ;;

3, select & ldquo network sharing Center; change adapter settings & rdquo ;;

4, in the network connections page, right-click on your current network connection, select & ldquo; properties & rdquo ;;

5, page selection in network properties & ldquo; internet protocol version 4 & rdquo ;, then click & ldquo; properties & rdquo ;;

6, Select “Use the following IP address”, enter your new IP address, and note that the IP you entered must not be the gateway address! You can use the address between 192.168.100.2-192.168.100.254, and you need to fill in the DNS server address with the IP address fixed! Refer to the reference material below for the DNS settings!

Solution two: Automatically assign

automatically assign IP addresses, the system checks the IP has been used, it will not be repeated!

1, while pressing Win + R key combination, bring up the & ldquo; run & rdquo; dialog, the CMD input, click OK to start command prompt;

2, the Enter ipconfig /renew in the command prompt box and press Enter. The system re-acquires the new IP address successfully!

These are the Win7 system prompt solutions to network IP address conflict, have encountered this prompt friends, can be resolved in accordance with the tutorial steps.