How to use Hyper Terminal? Win7 system using HyperTerminal to connect serial devices

HyperTerminal software configuration serial port is a contact with many veterans. When configuring, you need to make some adjustments on the serial port connection. Because of its cumbersome setup, some users may not know how to connect to the serial port device through HyperTerminal software. See this article.

Tool Preparation:

HyperTerminal Software Download

Serial Port Cable

Operation Method:

1. Use Serial Port Cable The computer is connected to the device.

2. Open the HyperTerminal software. The New Connection Wizard will pop up.

3. Enter a name in the Name box.

4. Select the interface to use when connecting. Select COM3 here.

5. Set the connection parameters according to the device type. My device uses the default parameters here, so I will click to restore the defaults.

6, click OK to enter the HyperTerminal interface.

7. Re-power the device and configure the interface.

8. After the configuration is complete, click the disconnect icon above.

9. The disconnection is successful. At this time, remove the serial cable connected to the computer.

END

The Win7 system does not have HyperTerminal software. If you need to use HyperTerminal to connect to the device, you can download the software provided in this article. When using HyperTerminal connection, confirm the device connection. Firm.