Win7 set to automatically start the NumLock key method

When you use a computer keyboard to play numbers, you are used to using the keypad. However, you must first enable the NumLock number lock button when you use the keypad. That is to say, the Num Lock light will be on and the keypad can be input normally. If you want to open the NumLock button to enter numbers every day, it is too much trouble. The following small series for everyone to share the Win7 system to set the boot automatically open the NumLock button three ways.

Method a: The easiest

power input password to login interface, the NumLock press, so that lights.

Note that at this time, do not enter a password to enter the system, directly restart the computer.

The system will remember your choice and automatically turn on the NumLock light the next time you turn it on!

If your system does not have a password, you can set a password first. Then perform the above operation. After the operation is complete, the system password can be removed.

Method two:

1, according to [Windosw logo key + R], open box operation, input sysedit in, the transport;

2, In the pop-up dialog box, find CONFIG.SYS, enter NumLock=OK, and then click [File] → [Save].

Method three: change the registry

1, according to [Windosw logo key + R], open box operation, input regedit, carriage return;

2, the registry editor, expand [HKEY_USERS] & rarr; & rarr [Default.]; [Control Panel] & rarr; [Keyboard];

3, the right value InitialKeyboardIndicators Change to 2, which means that NumLock is automatically turned on when you turn it on; if you change its value to 0, it means that NumLock is not turned on. Restart the system and you can see that the NumLock light on the keyboard is automatically turned on!

If you want to boot automatically open numlock, you can choose more than one of these methods to set, after set up, you can feel free to use the keypad.