Win7 uses SpeedFan to control the CPU fan speed adjustment method

When you see SpeedFan, what many users want is to use SpeedFan to automatically control the CPU fan speed. Users who use the Win7 system also want to use SpeedFan to automatically control the CPU fan speed. However, I don't know how to use SpeedFan to control CPU fan speed? Below, let's talk about Win7 using SpeedFan to control the CPU fan speed adjustment method.

The steps are as follows:

1. SpeedFan configuration

Many friends open the software to adjust the fan speed "Speed0x", and then find that there is no effect and disappointing, think this is invalid. Software. In fact, I don't know how to use SpeedFan, which makes it an illusion of useless software. In fact, there are still some simple preparations before the official adjustment of the speed. Let's get into the configuration first

2,

3. Let's go to the [Advanced] menu and select the control chip in the "chip" position. Don't worry if you don't know much, because usually Only if you select the correct control chip can you see the picture in the picture, if you choose other, you will not have these options. Next, select the "PWM 2 Mode" option, which refers to the control of the No. 2 fan (PWM 1, 3, 4, 5 and so on). We need to set the control method for it below. Here we have to choose "software control". Then [memorize]. This way we can go back to the main screen to adjust the fan speed. It should be noted that some fans will stop when the speed is lower than a certain level X%, so remember to pay attention to the fan speed to avoid loss. For a typical fan, the fan speed is the slowest when the speed is 0%.

Normally Fan1/Speed01 is for the CPU fan socket (CPU_FAN), Fan2/Speed02 is for the system fan socket (SYS_FAN), and Fan3/Speed03 is for the power fan socket (PWR_FAN). The author's FOXCONN G31AX-K motherboard is Fan2/Speed02 for CPU fan socket (CPU_FAN).

4, configuration speed

5, select speed 02 (each person's computer is different, some are 01, as long as the CPU fan speed)

6, the bottom of the picture The setting is SpeedFan's automatic speed adjustment function, we enable automatic change.

After configuring the speed 02

7, we can manually adjust the fan speed "speed 02", and then find that the Fan2 speed change is very obvious. Since we are regulating the CPU fan Fan2, other Fan x data is not displayed.

8. Set [Fan].

After configuration

9, automatic speed control configuration

Although we can manually adjust the speed, but still not satisfied. Next we need Fan2 to automatically adjust the speed according to the CPU temperature, then you need to configure the temperature, tell Fan02 which is the CPU temperature, and then adjust the speed according to this temperature.

After temperature configuration

10. Finally, tick "Automatically adjust fan speed". However, it should be noted that the control chip of the motherboard must be supported by SpeedFan. The socket of the fan must have a speed control function, and the SpeedFan automatic speed regulation can take effect. If we let SpeedFan turn on the automatic speed control, then put the SpeedFan shortcut into the “Start” folder, so the software will automatically start automatically at boot time, and then automatically adjust the speed according to the CPU temperature. In addition, when you press the F2 key, you can change the “Speed ​​02” and the display is “CPUFAN Speed ​​02” as shown.

11, other software features

In addition, the software also has built-in evaluation of the health and performance of the hard drive, you can also use the "online analysis" function to deepen your hard drive evaluation of.

Everyone has a deeper understanding of the SpeedFan software. It should help you through a quiet summer. You can go to www.crsky.com/soft/10252.html to download.

12, related issues

Finally, some people put forward: "In SpeedFan set the speed to 60%, how to boot up to 100%? ” On this issue, mainly the maximum speed value, the initial value of SpeedFan boot, the general maximum value is 100%, and then automatically adjust the speed from 100% according to the CPU temperature when booting. If you want to fix the speed at 60%, as shown in the figure:

About Win7 SpeedFan to control the CPU fan speed adjustment method will be introduced to you here. If you still don't know how to use SpeedFan to control the CPU fan speed, you can refer to the above method and follow the steps to complete the operation.