Win7 prompts reboot and select proper boot device error solution

I believe that everyone has encountered a reboot and select proper boot device error when the computer is booting! Displaying the reboot and select proper boot device at boot time probably means rebooting, then selecting the boot disk or inserting the bootable disk into the selected boot device. Recently, users who use the Win7 system have also experienced such a situation. How do you solve such a problem? Let me talk about the solution to the reboot and select proper boot device error after Win7 computer boot.

The steps are as follows:

1. The motherboard BIOS has no power, and you can't remember the hard disk information. If your system date is not correct recently, it is probably the reason.

Solution: Replace the BIOS battery.

This possibility is actually not big, but it takes less than 2 minutes to remove the battery.

2. The IDE cable is broken or the interface is broken.

Solution: Try replacing the IDE cable with the replacement method. If you change the IDE hard drive cable, it will be OK. The fault is here.

In fact, it is possible that the IDE line interface is loose, try a few seconds.

3, hard disk failure, that is, physical damage to the hard disk, this is more tragic.

Solution: Replace! ! ! !

This kind of probability is very big, and it is also very tragic to weld the warehouse. This computer is the hard disk damaged, it is easy to change the new hard disk.

To do data recovery, you can only spend money to find someone outside.

4, if your computer can detect the hard disk every time and can not enter the system, maybe the hard disk logical partition error,

Solution: completely re-format the hard disk, then Reinstall the system. The information is definitely not done, use it with caution.

After the Win7 computer boot prompts reboot and select proper boot device error solution is introduced here, I believe everyone will have such a situation! Then you may wish to try the above method, follow the steps to solve this problem.