Win7 system startup failure error prompt 0XC000000F how to solve?

  
                

Recently, users of Win7 system have reported that the computer has an error code of 0XC000000F during startup, which causes the system to fail to start. What caused this? How to solve it? In fact, problems that occur in such a problem are generally caused by loss or damage to the startup file. Below, let's take a look at the solution.

Symptom:

Windows failed to start, error code 0XC000000F, as shown:

Solution:

You can use Windows 7 system The CD rebuilds the BCD file to resolve this issue.

1, the Windows 7 installation disc into the drive, set to boot from the CD, as shown in FIG 1:

2, see & ldquo; Press any key to boot from CDDVD ; & rdquo; or press any key to start from the optical disk, briefly press any key on the keyboard as shown in FIG 2:

3, selected repair computer, FIG 3:

4, if the system recovery option appears repair and restart button, you can try this way to solve it (in most cases, you can boot normally), if you still can't start after the operation, please restart again. FIG 4:

5, system recovery options window, click on the command prompt, FIG. 5:

6, the command input window sequentially BOOTREC /FIXMBR, press Enter; enter BOOTREC /FIXBOOT, press Enter; enter BOOTREC /REBUILDBCD, press Enter, follow the on-screen prompts to select y operation, and finally enter exit to exit the command line window, as shown in Figure 6:

7, restart the computer, the system should be able to boot normally .

The above is the Win7 system startup failure error prompt: 0XC000000F solution, through the above operation, the system will not appear 0XC000000F error code, and can be started normally.

Copyright © Windows knowledge All Rights Reserved