Four steps to set the Win7 virtual wireless router settings

In the normal Internet process, it is inevitable to encounter some network problems, this time we need to check the status of the network connection, find the source of the problem. In the end, you need to use the content to be explained in this tutorial. The new features in Windows7 ——"Virtual Wifi", in short, Windows7 can virtualize another piece on the basis of the existing wireless network card. Wireless network card, support network sharing, let our computer become a wireless router! Let's talk about the Windows 7 virtual wireless router setup steps:

1. Run the command prompt as an administrator because the following steps Must be run under administrator privileges, so we can find the “Command Prompt” from the Start menu, or type cmd to search quickly, hold down the Ctrl and Shift keys and click the shortcut directly, so the program gets administrator rights. .

2. Enable and set the "Virtual Wifi NIC" mode to run the following command to enable the virtual wireless network card (equivalent to open the router):

netsh wlan set win7wifi mode=allow ssid=&rdquo ;wuxianle.com” key=wuxianle

There are three parameters in this command:

Mode:allow means that the virtual Wifi card is enabled, disallow is disabled, and the virtual NIC will disappear.

Ssid: The name of the wireless network, it is recommended to use English.

Key: The password for the wireless network. This password is used for secure WPA2 encryption of the wireless network, which can prevent the network from being blocked.

The above three parameters can be used separately. For example, only mode=disallow can be used to disable the virtual Wifi card.

3. Enable <;Internet Connection Sharing (ICS)" To share a connected Internet with other laptops or Wi-Fi devices, you need to enable the "Internet Connection Sharing" feature.

Open the Notebook & ldquo;Network Connections window, right click on the network connection that is connected to the Internet (the notebook is connected to the Internet), select “Properties>, switch to “Share” Tab, select “Allow other network users to connect via this computer's Internet connection, and then select the name of the network connection being used in the home network connection.

After confirmation, the “Shared” flag will appear next to the shared NIC icon, indicating that the setup was successful.

4. Open the virtual Wi-Fi network and continue to run the following command at the command prompt:

netsh wlan start win7wifi

This will open the virtual Wi we just set up. -Fi network (win7wifi), change the start of the above command to stop, you can disable this network.

At this time, other notebooks or Wi-Fi phones can wirelessly access the Internet via this notebook. However, this method requires the notebook to be on, and other devices can be networked. All of these configurations are low in cost, but if you frequently use your mobile phone to go online, it is recommended to buy a wireless router, which is more convenient to use.