When the computer reinstalls the system, it always gets stuck when installing windows.

The computer is always stuck when installing windows.



Pro, the English prompt on the computer screen means : An error occurred in disk read. This is caused by the unsuccessful restoration of your computer system. The only solution is to reinstall the operating system. You need to format the disk when reinstalling the system. If you don't, please ask a professional to install it. If you want to learn computer system installation, you will teach you the gray pebbles.

Method 1:

If your computer can boot into the system and connect to the network, download and install one: "One button restore" software, which provides you with Windows XP, Win7 and other operating systems, you can choose to install;

Method 2:

Reinstall the system using 360 guardian manual service;

Method 3:

Using a USB flash drive, you can go to the computer city to buy a system USB flash drive, plug in the computer, and install it with one click.

Method 4:

Home-made u boot U disk installation:

First, material tools:

1. A computer with good network connection ( Notebook
also works);

2.U disk: Capacity is greater than 4G.

Second, method steps:

1. Download and install u boot U disk production tool production system U disk, it is recommended to use old peach making tools;

2. Download Want Installed system image file - decompress spare;

3. Make system U disk:

(1) After installing u boot U disk making tool, run - insert U disk (most Good plug in the rear jack of the chassis) - one key production according to the default format (production failed several times);

(2) copy and paste the decompressed system file to u boot U disk GHO file In the folder (this step is very critical), Ok, a complete system disk is considered to be completed.

4. Installation system:

(1) Power on - press and hold F11 in 2~4 seconds (notes F10 in notebook, different models may be different, try several more) Enter the PE installation interface;

(2) Use the arrow keys to select boot from USB;

(3) After entering PE, select the second item (or the third item) - enter, wait Restore;

(4) After the restore is successful, the computer will automatically restart (if it can not be started, you can manually restart), pull out the U disk, press the prompt to operate Ok.

I hope to help you!





neichunxiao,congxinxiazhai






This should be a memory issue
>




Most of the time, it’s a memory problem. Just pull it down and wipe it.