The computer can't open how to reinstall the system ah'
The first boot can not enter the system to indicate that the system file is damaged or lost, you You can prepare one U disk (8G is suitable), and download a U disk system software on another easy-to-use computer. The specific steps are as follows:
Step 1: Prepare and pay attention to the production. Matters
Prepare the GHOST system you want to install. If you don't have a system, please search and download it on Baidu according to your needs (win7 or xp or win8, etc.).
Second Step: Install a USB flash drive system software to create a boot disk (Note: Install the software on any disk in your computer, not in a USB flash drive)
After the installation is complete, double-click to open the one-click software, insert the mobile storage device, click the "One button to make the usb boot disk" button and start to make the boot disk for you, (note the important data of the backup USB disk before the operation), wait for a moment to prompt the production Success can be. Note: Since the U disk system file is hidden, after opening the u disk, you will find that there are no files inside. Please don't worry that it has not been made successfully at this time.
Step 3: Check if there is a system file on the computer
If you don't have a system, please go to Baidu and search for it according to your needs. If you have downloaded it or have your own system, continue. Just one step.
Special reminder: Please put the system in the root directory of the D drive or E drive; if you need to install the system for other computers, you can copy the system files to the U disk.
Step 4: Restart your computer, enter the bios setup menu, set USB as the first boot disk (how to set up, please see the following method) (Hint: Please insert the USB flash drive first, start the boot project)
Two common setting methods: (Recommended to use the first one, start with a shortcut key)
The first type: boot directly to start the hotkey into the U disk system.
Second: After setting the BIOS, enter the U disk system
Step 5: Enter the U disk system boot menu interface
Select win2003PE or win8pe in the boot menu. , then press the Enter key to enter. During PE startup, the following interface will appear during the startup process. Some old computers may take 1 to 2 minutes to wait. Do not worry.
Step 6: Enter WindowsPE to start the recovery system
If you are a new computer or a new hard disk, you need to partition the system before you install it. (View the partition method) If it is not possible, you can open it directly. One-button studio PE installation. Select the system file you want to restore, click OK after selection, determine whether to restore the system, select Yes.
Note: If you use "One-button studio pe installed machine" can not open Your system file or installation error, please decompress your system (iso file), decompress the gho file inside the d disk or e disk root directory.
System recovery, After restarting the computer after the recovery is completed, it will enter the system automatic reinstallation process, just wait.
At this point, install the operating system with one-button u disk! You can forget the trouble that you can't install the operating system without the CD-ROM drive.
1. Make a backup of the U disk on the U disk before the boot disk.
2, hard disk with NTFS partition or Multi-hard disk system, drive letter arrangement of hard disk under DOS and in Windows The order may be different, please find and determine by yourself to avoid misuse.
3, U disk boot disk problems Main reason:
1
Motherboard
does not support U Disk boot (or imperfect support);
2 Some DOS software (especially for disk operations) may not be very good for U disk support;
3U disk is DOS After the emergence of new hardware, the type is more complicated, and most of the current USB devices do not have DOS drivers, the current use is basically compatible drivers, so some problems are inevitable;
4U The quality of the disk itself is problematic;
5 often has incorrect operation on the USB flash drive, such as 2000, XP, 2003, directly plugging and unplugging the USB flash drive, instead of uninstalling it through "Safely Remove Hardware".
4, some motherboards (especially the old motherboard) BIOS does not support U disk boot, so you will not find the corresponding option. If you have this problem, you can only refresh the BIOS to solve, if the BIOS is not resolved, only Can give up.
It may be a hardware problem. If the system can't enter, it can be solved by redoing the system. The redo system can be quickly installed through the PE system of the USB flash drive, or it can be restored by the ghost image.
The computer can't be opened, it may not be related to the system. It may be other factors. If you are not sure, then you should send it to a professional place to check it.
Using U disk PE installation system is relatively simple: download the GHO or ISO format installation package, U disk PE and boot the computer, respectively use the corresponding The tool can be installed with one click. The following content is for reference. ````
1, U disk PE production.
Tianyi, Chinese cabbage can be. Take God's will as an example:
1[20151201] BIOS+UEFI dual-boot, three-part U disk maintenance system (http://www.winpe.cc/list-7-1.html), which comes with one-click production Tools, easy to operate.
2 The same page "2016 latest system download", or download from other sites, attached.
2. Installation preparation.
1 system selection. Under normal circumstances, the installation memory is lower than 4G to select 32-bit, and vice versa to select 64-bit; single-core processor selects XP, dual-core, quad-core selects W7, etc.; W10 is not necessarily suitable for old computers.
2 system download. Put the downloaded installation package into a folder on the non-system partition of the hard disk, so that the installation is stable and fast. The ISO format is extracted and decompressed into a folder using UltraISO or decompression software; if the system cannot be started, it is performed under the PE.
3, system installation.
U disk boot computer, "Windows system installation tool" install ISO format (need to format the system partition); "Universal GHOST tool" install GHO format. [Note] Before installing the computer and restarting the computer, please eject the USB flash drive.
4, other references.
1 system restore backup. Old systems, new systems, can use the "general GHOST tool" in PE for backup/restore.
2 hardware driver preparation. At least prepare the NIC driver, or download the "Drive Life 6 Installer" option (http://qd.160.com/) according to the installation system version. Notebook
, brand computer try to use random drive CD, or download by host number official website. In addition, the tools in the PE can be used to back up the hardware drivers in the original system.
Attachment: System download and U disk boot method
Too perfect 000: http://twm000.blog.163.com/
Computer store: http://www.itgho.com/
System Home: http://www.ghost580.com/
U disk boot method: See 360 introduction (http://jijiupan.360.cn/startguide.html); U disk shortcut key to start query : Green tea (http://www.lcxtgj.com/).
Send it for repair
Get a U disk with the installed system and you can install it yourself