U disk cannot be found when the computer enters the startup item selection

The computer can not find the U disk when entering the startup item selection



There is a problem with the system. It is recommended to use the old peach, reinstall it, you can.





Are you sure your U disk is plugged in before you restart your computer?
Find hard disk after entering biso..., try it here





First say: It is impossible to find the U disk boot entry. Use U disk to boot, there are two ways: 1, enter the BIOS to hit the BOOT menu, there should be a U disk boot item, of course, not necessarily written USB-HDD, may be not identified. 2, use the U disk to start, you can also use the boot to start the selection menu, ASUS notebook
boot menu button may be ESC, no longer try F12 or something. Secondly, for the new
notebook
, you can refer to: First, restart the computer, BIOS settings interface, move the cursor to the "EXIT" project, find the "OS Optimized Defaults" option, press "Enter" The key opens the setting menu of this option. After changing the default "Win8 64bit" of the option to "Others", press the "Enter" key to confirm. Then find the "Load Default Setting" option, press the Enter key to start the Restore BIOS default function window, in this window directly press the "Enter" button on the notebook keyboard to start the BIOS to restore the default function. Then press the "F10" button or the "Fn button +" F10 button on the notebook keyboard to start the BIOS save settings window, and directly press the "Enter" button on the notebook keyboard to start the BIOS save settings in the window. After the computer restarts, enter the BIOS, find the "Boot" project, then find the "Boot Mode" option under the project, press the "Enter" key to open the setting menu of the option, and change the default "UEFI" of the option to "" Legacy Support "Press the "Enter" button to confirm, then select the "BootPriority" option, change the default "UEFI First" of the option to "Legacy First" and press the "Enter" button to confirm. Then press the notebook. Press the “F10” key or “Fn key+” F10” key on the keyboard to start the BIOS save setting window. In this window, press the “Enter” key on the notebook keyboard to start the BIOS save setting and restart the computer function. Third, after restarting the computer, find the boot option of the computer, select the boot mode you need, and you can do it. Generally, the CD-ROM drive and the USB flash drive can be started, and then you can directly install the Win7 system. Fourth, the method of installing the system is very simple, presumably many people have installed it, can not refer to this tutorial, how to install the system?