Vista System Frequently Asked Questions (1)

First About slow running issues. 1 The problem of high CPU usage of the computer, some of which are BIOS problems, it is necessary to upgrade.

The fan will start the preheating program at a low temperature of about 10 degrees, so that the fan is always at high speed and the CPU usage is high. The latest BIOS can solve the fan problem. This upgrade is just the temperature to start the warm-up program. Adjusted to 0 degrees, there is no other modification, the temperature control function can still be used normally, the fan will start automatically when the temperature exceeds the warning temperature.

Note: When updating bios, please be sure to connect the battery and power supply, otherwise suddenly power off. . . . . .

2 Vista open folder fake crash, Explore.exe takes more than 90

Workaround: Go to "Tools" "Folder Options" "View", "Always show icons, never The thumbnail is displayed, the problem is solved, and the system speed is significantly improved when accessing files and folders.

Remarks: I have tried, if there is a platform installed, it will cause such a situation in the C drive, waiting for the vista version of the HF to be more compatible ~~

3 Startup problem < Br>

A lot of people still like to use msconfig, most of the previous versions of Windows can run -- msconfig to control the service and boot items (Win2000 does not have this), of course, the less boot, the speed The sooner, the sentence is correct. But only limited to software ~~ -

Under vista, you can also adjust the boot entry through msconfig, but after restarting, the bottom right corner will prompt for unloaded startup items, then turn off this is very troublesome. . We can solve the problem of booting items through Vista Optimizer (click to download), Windows Defender, and will not pop up the boot prompt.

About the service, you can find all your services through the control panel--management tools--services, all have Chinese explanation, you can open and disable according to your needs, but there is a saying, It must be said that it is not necessary to serve less, and the machine runs fast. Therefore, the personal recommendation that the Vista Optimization Master's service wizard is sufficient to meet the needs of ordinary users.

Sometimes the computer runs slowly. It is also related to three problems: the computer runs disk defragmentation in the background; the computer downloads and updates in the background; the computer is scanning for viruses.

Second Time to open large files for too long -

Disable UAC: Disable UAC in "Control Panel - User Accounts - Turn User Account Control On or Off".

The third function using Readyboost

is equivalent to adding memory to improve the speed of the computer. Someone tested that the effect on the computer with 512MB memory is obvious, but the effect of 1G memory is not obvious. Do not cancel the virtual memory below 2GB. If there are conditions, of course, it is better to increase the physical memory.

Fourth solves the problem of slow copying.

1. Disable the "remote differential compression" function.

Remote Differential Compression (RDC) is a new compression protocol that enables efficient updating of files on a limited bandwidth network. RDC detects the insertion, deletion, and rearrangement of data in a file, enabling DFS Replication to replicate only changes when the file is updated. In addition, RDC has a feature called Cross File RDC that helps reduce the bandwidth required to copy new files.

2, use "copy" - "paste" instead of "send".

3, follow Microsoft, patch.

The fifth Internet is slow or can not get online, BT download slow and so on.

1 The problem of not being able to access the Internet

There is no computer on the LAN. The main reason is that some LANs require client software and compatibility issues with VISTA. Second, the telecommunications sector in some places has limited the number of broadband network users. The new computer is restricted from accessing the Internet and can be resolved by contacting the telecommunications department. There may be reasons for anti-virus software. You can try the anti-virus software that comes with it. I heard that other anti-virus software has similar problems. You should turn off anti-phishing.

After solving the problem of anti-virus software, I can't get on the Internet, that is, the problem of setting up the Internet. Find a reason by looking for a computer that can connect to the Internet.

There is also the problem that Windows Vista cannot obtain an IP address from some routers or non-Microsoft DHCP servers:

The correction is as follows: (This part is issued by Microsoft official website)

1. Click Start

, type regedit in the Start Search box, and then click regedit in the Programs list.

If you are prompted for an administrator password or for confirmation, type your password or click Continue.

2. Locate and then click the following registry subkey: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParametersInterfaces{GUID}

In this registry path, click the corresponding network adapter that is connected to the network ( GUID)" child.

3. On the Edit menu, point to New, and then click DWORD (32-bit) Value.

4. In the New Value #1 box, type DhcpConnEnableBcastFlagToggle, and then press ENTER.

5. Right-click DhcpConnEnableBcastFlagToggle and click Modify.

6. In the Value data box, type 1, and then click OK.

Note: Failure to shut down properly can sometimes damage the driver of the network card, resulting in the inability to access the Internet. At this time, the driver must be reinstalled.

Also note that there is one in the wireless network card device manager: Allow the computer to turn off this device to save power.

We also found that sometimes the Internet is slow or the computer is running slow. The computer is downloading and updating the system in the background. This is because the automatic download update is set in the security center.

2 Solving the problem of slow download speed of Vista multi-threading (Thunderbolt BT)

Special reminder for Vista SP1, don't solve the number of threads

3 How to set up wireless Internet access.

To have a wireless router with dial-up function, follow the instructions in the router manual, set up: user name and password for Internet access; automatically assign address; can be found - that is, broadcast function is enabled. Security feature - do not set the password first. The computer uses the default settings, which automatically obtain an IP address and automatically obtain the DNS server address. After setting it up, you should be able to connect to the router and go to the Internet. If password protection is required, then it will be set in the router. When connecting, enter the same password in the computer as prompted.

It should be noted that when setting up the router, the network card address in the computer should be set to the same address segment as the address of the router to enter the router for setting. Therefore, after setting the router, you must reset the network card in the computer. The address is set to automatically obtain an IP address, otherwise it will not be able to access the network. The DNS server address is generally not set, and the setting is nothing more than searching the server address faster.

The sixth can't open the webpage (there is no download of large software)

The main reason is that the browser is damaged, related to the software used and the webpage. The only solution is to not change the security settings of the computer easily in order to run some software.

It is also possible to have the same reason as the previous problem, anti-virus software, it is recommended to cancel the anti-phishing function.

About the problem of QQ, but can't open the webpage (this part of the forum is also a reference to Microsoft's method)

Microsoft official description of this problem is as follows:

Users may find that after the Internet connection sharing is configured in Windows Vista, initially, after a working network is working for one to two hours, the network connection stops (normal operation). For example, you may not be able to connect to the Internet, as well as other computers on a local area network (LAN) or access network resources on the local area network.

There is such a problem, generally because Windows Vista system has enabled "Internet Connection Sharing" during the running process. If users need to solve this problem, there are two ways: one is to temporarily disable Internet access sharing. Or go to Microsoft's official website to download a patch (click to enter) to solve.

If you still can't solve the problem after using the official patch released by Microsoft, I suggest you solve it from the following aspects:

1, reconfigure DNS;

2 , reset IE, let IE 7 restore the default system settings;

3, turn off the firewall, if the firewall is turned on, please enable it and then turn it off;

4, disable local connection, then Then enable local connections.

5. Turn off p2p software such as Thunder and BT, especially after Thunder downloads the software, please close it immediately, whether you have set up sharing or not.

In fact, when solving the problem of "QQ

can but can't open the webpage", the methods of Windows Vista and Windows XP are basically the same, except that Microsoft has released it specifically for Windows Vista. A patch, while Windows XP does not.

Add another way to repair your usual: (provided you have to keep up with Microsoft updates)

1 Try to check the status in the network and sharing center - disable the current network - and then Click on the red fork - discover the new network. (Repair the network)

2 Find your local connection and right click - see if all things are automatically getting DNS

3 About internet settings--connection--LAN settings -- Turn off the automatic detection server

Kaba 6.0 problem - After a lot of experiments on multiple machines, Kabbah 7.0 can be perfectly compatible with vista, and compatibility with Kabbah 6.0 is OK, but Kabbah 6.0 Sometimes there will be an update that cannot be completed, it has not responded, and it has been updated. At this time, you will find that IE can't open. At this time, only restarting can solve this problem.

Workaround--Modify Kaspersky's update to a specified time, or manually update (for 6.0)

Seven get the highest privilege

1 Click the right mouse button on the icon of the program you want to run, and then click Properties.

2, open the folder properties tab, click in order: Security - Advanced - Owner - Edit, select the Administrators user group (or the group your user is in), and check the box below "Replace subcontainers and owners of objects." Determining and closing the properties dialog takes ownership of the file.

3, (Fix) Click the right mouse button again to open the Properties dialog box, click: Security - Advanced - Permissions - Edit, select the two hooks below, then select and double-click Administrators (or Your user's group> Click "Full Control", press OK to exit in order.

4, through vista optimization master--system settings--right-click settings--right-click to get all permissions of the administrator After adding, you can use the right button to open when executing the program.

The eighth deletes some files under the C drive

1, cancels the user account control (UAC, cancel it is equal to the disabled permission limit After that, you can cancel some startup programs in the change startup program to reduce the memory usage. After completing the required work, you can restart UAC to ensure the security of the computer.

UAC and user rights, VISTA is two new measures on security issues. VISTA is much better than other systems, but it is often criticized for its performance. Security and performance itself are a pair of contradictions, both safe and high performance. Easy. Believe Soft will have a way to gradually improve. Just like XP in the past.

2, use the master right button to get all the administrator privileges and delete

3, with the software unlocker, a small software , will be added in your right-click menu, you can associate and unlock most of the files.

The ninth restores the previous system state.

In addition to the system itself automatically set the restore point, the key The restore point should be set manually. When recovering from the restore point, sometimes it will not be restored in VISTA. At this time, the OEM machine can press F* (DELL F8, HP F11, Lenovo blue key) to enter the recovery function when restarting. Generally, it can be recovered. If this step can't be recovered, you can only reinstall the system.

After installing a new program (software, hardware), if you find that the system is not working properly, you must pass The restore point is restored to the previous system.

After a period of use, the computer will find that the hard disk space is getting smaller and smaller, which is more and more restore points. At this time, you need to clean the hard disk.

Note: The computer will only keep the latest one when it is cleaned up. , The other will be deleted.