Win7 notebook camera can't open how it happened

Win7 notebook camera can't open how it happened

First, the computer settings enable the camera

1. Right click on the computer and select “Manage”:

2, as shown below:

3. Click on “Device Manager” and select the camera device under the image device. Click the “Enable” button above:

4, as shown below:

5, wait a moment, you can enable success. If the activation is not available, you can try to restart the computer:

6, as shown below:

Second, the driver wizard driver

1, the mainstream camera is the system default The driver can be enabled, which is often said to be a driverless camera. If it can't be used, the motherboard does not recognize the camera, try to upgrade the motherboard driver:

2, download and install the driver wizard 212, and run:

3, as shown below:

4, click & ldquo; driver & rdquo;, under the motherboard Download & rdquo;, wait patiently for the download to complete:

5, as shown below:

6, click “Install & rdquo;:

7, as shown below:

8. Click on the newly opened window “ is ”, go to the next step:

9, as shown below:

10, patiently wait for the installation to complete, and single Click "Next" & rdquo;:

11, as shown below:

12, if prompted to install the device, please select "Install" ”:

13, as follows Figure:

14. Select whether to restart the computer as needed, and then click “Complete”:

15. As shown below:

16. After restarting the computer, You can use the camera.

Third, the camera itself problem review

1, connect the camera to the computer, if the camera's indicator light is on, it means the camera's power supply is no problem:

2, connect the camera to On other computers, if it works normally, it means that the camera is ok, otherwise, please replace the camera: