How to solve the problem that win7 system Thunder can not log in

How to solve the problem that Win7 system cannot be logged in

Fault reason:

1. If it happens suddenly, you can test whether you have the same situation with the person next to it.

2, it is recommended to restart Thunder, try it.

3, it is recommended to turn off the soft killing, firewall, 360 and other traffic monitoring software

4, unplug the network cable or not connected to the router, reconnect the network later and try again. (Suddenly can't log in, not long-term login, this situation is generally a short-term network exception, it is recommended to try to restart the network later and later)

Solution:

1. Go to the computer and delete it here. C:Program Files → Common Files → Thunder Network → TP → Ver1 files. Then, restart the Thunder attempt.

2, invalid, please go to the control panel on the computer - uninstall Thunder 7, and then re-download a new Thunder to install. (Be sure to uninstall and re-install, it is best to change the disk to install, to avoid overwriting the old problem

3, as the above tips have been confirmed, please judge whether you can download (if you can not download, certainly If you are not able to log in, you need to solve the problem that cannot be downloaded first.)

4. Try to adjust the number of connections.

The number of global connections is 100.

How to change the connection number: Open The configuration center in Thunder 7 - the left side of my download - common settings to modify, and then the lower right application, as shown below. [1 picture is 7.2] [2 picture is 7.9] [3 picture is exclusive version]

Download tool repair

1. Download the repair tool;

2. Please select the corresponding Thunder version and server. After successful selection, the tool will automatically jump to the ping server;

Note: Please select the carrier server first for the network other than Telecom Unicom.

3. There are generally two results after ping:

The first type: ping nowhere, as shown below Directly display timeout.

Because the server has four (as shown below), it allows users Try to ping another server to be able to work together.

The second type: you can ping the following picture click “ application configuration & rdquo;, here will automatically write hosts, prompting the application configuration is successful, then Restart Thunder, see if you can log in;

If the four server operators, Telecom, China Unicom, and Shenzhen server all appear as shown below, the request timeout is a network problem

Solution: Find the network operator to solve the problem of pinging this IP;

If there is no problem with the system and there is no problem with the Thunder client, then there is a problem with one of the above, just follow the steps above. Check to eliminate the problem.