Win7 blue screen error code 0x000000c2 how to do

Win7 system computer blue screen error code 0x000000c2 solution.

The solution is as follows:

First, the system problem, use the system installation CD to repair the system or use the sfc /SCANNOW repair system in the system; if you still can not solve the problem, you can only reinstall the system It is.

Second, the system files are deleted by anti-virus software, Kabbah and other anti-virus software will sometimes remove the virus-infected system files or drivers. This caused some system files or drivers to be damaged or lost, resulting in blue screen code 0x000000C2. This situation can also be combined with system problems, and the system needs to be reinstalled to solve the blue screen failure. System repair operation flow:

1. First insert the repaired drive CD into the CD-ROM drive, then restart the computer, press and hold the F12 button to enter the system from the CD-ROM drive, or enter bios, set the CD-ROM drive through bios A way to start. After the CD-ROM drive, the screen will appear Press any key to boot from CD. . Please press any key.

2. After about one minute, the system will appear to welcome the installer menu. The menu contains the following three options:

(1) To install Windows now, press Enter.

(2) To repair with the console, press R.

(3) To exit the installer, press F3.

3, press R to choose to enter "restore console";

4, the system prompts to choose the Windows installation partition, the general default is installed in the first partition, after selection, Press the Enter key to confirm.

5, the system prompts to enter the administrator password, if the administrator password is empty, type the Enter key directly.

6, at the system prompt, such as "C: WINDOWS", enter disable cnsminkp Enter.

7, enter Exit to restart the computer

Third, the system bios settings error, bios is a software that supports the initial level of computer hardware. Once the BIOS is set incorrectly, such as CPU overclocking, etc., blue screen code 0x000000C2 and other faults will also appear. Bios

Setting error You can try to restore bios to factory settings.

In summary, if you have recently installed the software or installed a new hardware driver, you can uninstall it in safe mode.