Win7 connection network prompts how to solve the broadband connection?

Recently, users of Win7 system reported that when they connected to the network, they could not find the broadband connection, which made it impossible to connect to the network. So, what is the reason for this? For this problem, Xiaobian summed up the following reasons and solutions, let's take a look.

The problem of broadband connection cannot be found. There are several possibilities:

1. The NIC is faulty or the NIC driver is not installed properly.

2. The network is disabled.

3, the created dial-up broadband connection is not created

Solution:

1. Enter the device manager, check whether the NIC driver is installed properly, and see if the NIC is Disabled, right click "Computer" and select "Manage" & rdquo; select "Device Manager", under normal circumstances, this is the case in the device manager, as shown below.

The above picture shows the normal network card status. If the driver is not installed or disabled, there will be a yellow exclamation point or a red disable slash. If it is a driver problem, then it is recommended that you download the corresponding one according to your network card type. Drive, then copy and install; if the network card is disabled, then right click to enable.

If the device manager checks that everything is working properly, then it may not have created a broadband connection. It is recommended to delete the original one and re-create a broadband connection.