Win7 system settings and debug gamepad method

1. First insert the handle on the computer host. After the computer has installed the driver, in the [Start] menu, select [Devices and Printers] to set it;

2. Open [Devices and Printers] Then select the icon of the gamepad that the computer is connected to;

3. Right-click the icon of the gamepad to set it. Then click the [Properties] button in the lower right corner of the [Game Controller] setting interface;

4. Under the [Test] tab, we can test whether the buttons of the handle are working properly. First, you can rotate and press the left rudder and direction buttons in the handle to see if the cross cursor movement above the X-axis/Y-axis is normal. Finally the cross cursor should be centered. Remember to test all the keys of the handle again! In order to avoid having a key that breaks the passion that affects the game, it is not good;

5, if the above test handle problem does not feel normal, then go Calibrate the gamepad. (Small series is professional!) You can select the [Calibration] button function in the [Settings] tab to calibrate the gamepad;

6. Go to the “Device Calibration Wizard” and click [Next] according to the prompts. One step】;

7. In the [Calibration Axis] interface, rotate the left rudder of the handle a few turns to reposition the center point. This process calibrates the gamepad's “X-axis/Y-axis”;;

8. Finally, adjust the Z-axis calibration procedure. Move the Z axis up and down, that is, move the right rudder on the handle to calibrate. Then, the Z axis is rotated and calibrated. After the Z-axis calibration is completed, it will automatically jump to the following interface. After clicking the [Finish] button, the handle can be used normally.