Problem prompt:
Problem time name: bluescreen
OS version: 6.1.7601.2.1.0.256.1
Regional setting ID: 2052
Additional information about this issue:
BCCode: 1000007e
BCP1: C0000005
BCP2: 8357163C
BCP3: 9018FC1C
BCP4: 9018F800
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
A file that helps describe the problem:
C:WindowsMinidump41211-15054-01.dmp
C:UsersAdministratorAppDataLocalTempWER-25568-0.sysdata.xml
As shown:
The previous Xiaobian introduced some methods for dealing with the blue screen of the computer system. Today Xiaobian teaches you to use the exclusion method to judge the cause. Let's take a look at how to use the exclusion method.
Computer blue screen fault repair method:
1, first we must understand some of the blue screen and some of the operations we did before the blue screen, such as: computer CPU or memory and other overclocking, there is a blue screen. This will help us understand the main reasons for the blue screen in the first place.
2. If the blue screen is caused when we use the optical drive, it is very likely that the blue screen is caused by the wrong operation of the optical drive. Then we need to re-insert the optical disk into the optical drive and then close the optical drive tray again.
3, if you are pulling out some plugs of the socket and causing the computer blue screen, then we only need to restart the computer.
4, if we run a certain software or program, causing the computer blue screen, then it is very likely that this program is not compatible with the computer or the software itself, we only need to uninstall or reinstall the software.
5, if the computer is blue screen when booting into the system, then there are many reasons for this, Xiaobian also explained a lot to everyone in front, recommend everyone to read: how to solve the blue screen of the computer, solve the blue screen of the computer Method
6, if the computer computer failure still exists, then we can enter the safe mode when booting, and then exit the safe mode system, then restart the system.
7, we can also restore the original look of the registry, then we look at whether it is due to the registry caused by the blue screen of the computer.
8, if the above steps have not been sorted out, then we can only reinstall the system, there is a problem after reinstalling the system, then it is likely to be caused by hardware problems, check the hardware in time.
The above is about some troubleshooting methods after the blue screen of the computer, then let's take a look at the solution to solve the blue screen failure of Windows 7 BlueScreen:
WIN Ultimate, the BlueScreen blue screen solution after shutdown:
First confirm which reason you are causing:
1. The blue screen prompt is:
Technical information
*** STOP: 0x00000018 (0x00000000, 0x983F2280, 0x00000000, 0xFFFFFFFF)***
* ** hpmobiledisk.sys - Address 983F2280 base at 983C8000, Datestamp 45bf6474***
2, you have used some U disk encryption software in WIN7 system
Solution:
1, delete X: windowssyetem32drivershpmobiledisk .sys file
2, enter the device manager of the computer, then click View in the menu, then click on the display hidden device to enter "Non-Plug and Play Driver", find the program hpmobiledisk uninstall, then put it Restart. As shown in the figure:
Solve windows 7 BlueScreen blue screen failure method two:
Try WinDebug, the details are as follows:
1, right click on my computer, and then select the properties of the drop-down menu >> Advanced >> Start, select the best one in the bottom memory debug, and then click OK to restart.
2, after the blue screen, we do not rush to restart, wait for the system to save the entire memory file and then restart.
3, then find C: WindowsMinidump
4, create a temporary directory after installation, such as: c: temp
5, then restart windebug software
6, in the windebug interface, click in the menu bar File>gt;Symbol File Path(Ctrl+S) input: SRV*c:temp*http://msdl.microsoft.com/download/symbols then OK
7, then click file>>Open Crash Dump (Ctrl+D), then open C:WindowsMinidumpMini122208-01.dmp (the file name is different with the date) waiting for analysis, then when the computer prompts Use !analyze -v to get detailed debugging information. , enter the box below!analyze -v
8, after such processing, you can know what causes the problem, and then we can deal with the problem.