Open the hidden function of Windows 7: Virtual WiFi and SoftAP (virtual wireless AP), you can turn the computer into a wireless router, share the Internet, save network fees and router purchase fees. Xiaobian pro test, more convenient than other software, stable, good network speed! Take the notebook with the operating system win7 or the desktop with the wireless network card as the host.
Method/Step (No Software)
- 1 Run the command prompt as an administrator: “Start”---Enter in the search field “cmd”---- Right-click "Run as administrator" &
- 2 Enable and set virtual WiFi network card: Run the command: netsh wlan set hostednetwork mode=allow ssid=wuminPC key=wuminWiFi (Note: The above command "ssid" After the red word is the network name, you can just name it yourself, for example, wuminPC can be changed to MyWiFi, etc., you like how to name it, "Key" The red word is the password, you can just name it yourself, for example, wuminWiFi can be changed to 12345678, in short, name it yourself. Yes, it is not necessary to have this network name, this password, password is better than 8 digits.) This command has three parameters, mode: whether to enable virtual WiFi network card, disable to disallow. Ssid: The name of the wireless network, preferably in English (using wuminPC as an example), that is, the name of the wifi to be set. Key: wireless network password, more than eight characters (using wuminWiFi as an example), that is, the wifi password you want to set. The above three parameters can be used separately. For example, only mode=disallow can be used to directly disable the virtual Wifi NIC. I believe that people who have used DOS before know how to run the command, that is, press enter netsh wlan set hostednetwork mode=allow ssid=wuminPC key=wuminWiFi After running, see the following:
- 3 Then open & ldquo;Network and Sharing Center -&&quo;Change Adapter Settings> See if there is one more item, if there is more than this item "Microsoft Virtual WiFi Miniport Adapter", then the setting before you is correct.
- 4 When the connection is successful, one more network card will be connected to the wireless network of “Microsoft Virtual WiFi Miniport Adapter”. For convenience, rename it to virtual WiFi. If not, just update the wireless network card driver and it will be OK.
- 5 Set up Internet Connection Sharing: In the "Network Connections" window, right-click on the network connection that is connected to the Internet, select “Properties”→“Share”, check &ldquo Allow other ······connect(N)” and select “Virtual WiFi”.
- 6 After confirming, the shared NIC icon will appear next to the words "Shared", indicating that "Broadband Connection" has been shared to & ldquo; Virtual WiFi.
- 7 Turn on the wireless network: continue to run in the command prompt: netsh wlan start hostednetwork Of course you can create a new Notepad file copy: netsh wlan start hostednetwork Then save as: start WIFI hotspot.bat next time you boot Just run as “administrator"
- 8 At this point, the red cross of the virtual WiFi disappears, the WiFi base station has been set up, and the host is set. , iphone, touch, notebook, mobile phone with WiFi module, etc. Search for wireless network wuminPC, enter the password wuminWiFi, you can share the Internet! The network name and password can be written as you like.
Method /(software article) to download and install Cube
open the home page, find the upper part of the function Daquan
in function Daquan do sidebar, click network, and then find the cube WiFi Assistant, click download module and open WiFi
be set, as shown, then click open the hot
already open WiFi hotspots
search using another computer to said wireless network, click the link, enter the key to
assistant at Cube WiFi connection to the computer you can see the end of or the connection information of the mobile device