How to deal with w7 computer slow response

I don't know if you found that there is no Win7 system for a long time, the running speed is very slow, sometimes you encounter an urgent matter, you will really get angry. So how to deal with slow response of w7 computer? This article will give you an analysis of the optimization method of Win7 system running slower and slower, please see the specific steps below.

Solution:

Method 1: Uninstalling Unusual Software

Method 2, Using 360 Security Guard Optimization Acceleration

Method 3, Cleaning the Computer Desktop < Br>

Method four, computer disk defragmentation

1, the computer has been used for a long time, run for a long time, it will produce disk fragmentation, this will also affect the computer's reaction speed, therefore, it can be its disk The pieces are sorted out. Go to the root of the computer, right click on the C drive and click on <;Properties”.

2. Under the Attributes column, click “Tools” to enter the toolbar and click on the defragmentation & rdquo; below.

3, enter the disk defragmentation interface, click to select the c drive, click on the "analysis disk" below, for fragmentation analysis.

4. Wait for the disk fragmentation analysis to complete, click & ldquo; Disk Defragmentation & rdquo;. Waiting for finishing.

5, here is a warm reminder, if you do not want to defragment in the future, you want to set to automatically organize, click “ configuration plan & rdquo;.

6, set the frequency and time of disk sorting; frequency personally recommended once or two weeks is enough, time selection is less when the workload, such as Saturday, click <; select disk & rdquo;.

7, here you can choose to automatically organize the disk, here you can select all the disks, after selection, click “ OK & rdquo;.

8, return to the main interface, click & ldquo; OK & rdquo;, then turn off the disk finishing interface. Tips: Here to save time, just sorted out the C drive, if you have time, you can also organize other disks together, relatively better. Of course, you may feel that these operations seem to be not enough, but then proceed as follows.

Method 5, change the computer virtual memory

1, because the computer's reaction is to use the memory for data exchange, and if the computer's own memory is small, or often run more A large program, this data exchange is prone to full load, that is, insufficient memory, this time the most effective is to buy a memory stick to expand the memory; however, for most people, you can use virtual memory to solve this problem. Right click on the desktop &&quoquo;computer”, select “properties”.

2. Enter the property interface and click on “Advanced System Configuration” in the upper left corner to enter the system configuration.

3. Go to the system properties and click “Advanced", under the "Performance" column, click “Set”.

4, enter the settings, click “ Advanced & rdquo;, in the virtual memory under the advanced section, click & ldquo; change & rdquo; to change the virtual memory.

5, here is the key part of the change: remove “ automatically manage the paging file size of all drives & rdquo; the front of the hook & radic;; do not choose C drive here, choose other remaining memory is not often used Disk, such as E disk or D disk or F disk; "Custom size", the minimum value, can be selected as the computer memory size, the maximum value can be selected as 1.5~3 times of the computer memory; view the computer memory mode To right click on the desktop & ldquo; Computer & rdquo;, click “ Properties & rdquo; you can view; enter, click “ Settings & rdquo;, then click & ldquo; OK & rdquo;.

6. Tip If the changes take effect, you need to restart your computer and click “OK”.

7. Return to the Performance Options window, click “Apply”, then click “OK”.

8. Finally return to the property interface, click “ OK & rdquo; close the system settings.

9. Finally, if the settings take effect, you need to restart your computer and click “restart now”. If you don't want to start it immediately, you can start it later. This operation of modifying virtual memory is not obvious enough under normal conditions, because the computer preferentially uses RAM to exchange data, and the speed is also faster. If it is running a large program or multiple programs, the effect is presented.

Method six, reinstall the pure version system