Usb wireless network card driver how to install TP-Link wireless network card driver installation tutorial

For some desktop computers or netbooks without built-in wireless network card, by purchasing a usb wireless network card, then plug in the computer's USB interface, then install ubs The wireless network card driver allows the desktop computer to connect to the Wifi wireless network. For desktop computers, the most important thing to connect to a wireless network is to install the driver for the ubs wireless network. After the installation is successful, just like the notebook, you can connect to the Wifi wireless network.

usb wireless network card driver how to install TP-Link wireless network card driver installation tutorial

This article, Xiaobian TP-Link usb wireless network card as an example, teach you how to install usb wireless network card driver, The specific method steps are as follows:

1. First insert the usb wireless network card into the usb interface on the back of the desktop computer chassis. Note that it is best to plug it into the usb interface on the back of the chassis. Do not plug it into the interface on the front of the chassis. Also, try to plug in the usb2.0 interface.

In addition, the desktop computer is the first time to install the driver for the ubs wireless network card, you need to download, so you need to plug in the network cable first, so that the desktop computer can access the Internet, easy to find the driver. Of course, if the desktop computer does not have a network cable, you can also look at the purchased ubs wireless network card brand model, and then go to other computers to download the corresponding model driver to the U disk, and then get back to install.

Because there is a router next to the small desktop computer, you can plug in the Internet directly. Here's how to download the usb wireless network card driver.

2. Insert the TP-Link ubs wireless network card into the interface on the back of the chassis, then right click on the computer and click to open the “Device Manager”.

After opening the device manager, check to see if the computer has recognized the wireless network card device. Under normal circumstances, you can find a device that does not have a driver installed. This device is the wireless network card that has just been plugged into the computer, as shown above.

If the computer does not recognize the new device, the wireless network card may not be plugged in. Try another ubs interface.

3. After confirming that the computer can recognize the USB wireless network card, you can install the driver. It is not difficult to install the usb wireless network driver. You can find the driver download of the corresponding brand model directly on the Internet. You can also install it online with the help of the driver wizard and master Lu. Below, Xiao Bian is the master of Lu, first open Master Lu (no, download and install in advance). After opening, click "Drive Detection" as shown below.

4, then you can detect that there is a USB NIC driver to install, click "Install" at the back, as shown below.

5. After waiting for the installation of the usb wireless network card driver, you can unplug the network cable inserted in the computer, and then click the “wireless icon” in the lower right corner of the desktop taskbar to search for Wifi wireless. Network, then select the wireless network you need to connect, and enter the password to connect, you can go online, as shown below.

After successfully connecting to the Wifi wireless network, the desktop computer can use the same wireless network as the notebook. In addition, you can move your desktop computer to a wireless location farther away from the router, so that the desktop computer can be completely away from the network cable.