9 minutes U disk loaded Win7 SSD fast loading Win7 graphic tutorial

SSD installation platform has the advantage of boot speed and response speed, many users also buy an SSD as a system disk, then how to install the system is simple Fast has become a problem that users must face. The following small series uses a 240GB SSD solid state hard disk to install Win7, using a U disk to install the system for the solid state drive, the installation time takes less than 10 minutes, the solid state drive system is also fast enough.

SSD installed system does not ask for 9 minutes U disk fast loading win7

The current USB boot installation system is accepted by more and more users, USB flash drive installation system compared to CD- It is more convenient to carry and save the ROM. Today we have chosen the way to install the Windows 7 system on the USB flash drive.

Prepare U disk and solid state hard disk

Before you prepare the tool, you can proceed to the next step. Remember that the capacity of the U disk must be greater than 4G. After all, a system image file. It is close to 4G, otherwise you will not be happy to proceed to the next step.

Win7 system image write boot disk production

We start from the system USB flash drive production, we just need to find a 4GB capacity idle USB flash drive can be turned into a replacement CD System installation method.

Windows7USB/DVDDownloadTool

There are many official official image downloads of Win732/64-bit online. Readers can download and follow the article to write the image file to the disk. The author will also introduce A USB flash drive startup software that is faster and safer than other writers.

This software is a file compression writing tool issued by Microsoft specifically for installing the system through the USB interface or DVD boot CD. Users can complete the system installation disk by writing to the CD or writing to the DVD. Production.

Windows7USB/DVDDownloadTool

Select the address of the scene file you need to add.

Add the downloaded Win7 image file to the program

Select USBdevice to start the image write

Select what you want After installing the drive letter, click "Begin" in the lower right corner

File to start importing

A USB system boot disk is created after waiting for completion. Is this software operation very good? Simple, with this tool we can proceed to the next step.

BIOS Settings

After the SSD is installed, we can turn on the power. Here we need to pay attention to if you find your The computer does not automatically recognize the USB boot entry. We will need to change some settings in the BIOS. Due to the different BIOS settings on the motherboard, if your new SSD is not recognized after it is installed on your computer, we can change to "IDE" mode.

The author's computer BIOS settings interface

So what is the difference between AHCI and IDE? Compared with the latter IDE, AHCI is a new interface standard under the guidance of Intel. It is essentially a PCI-like device. If there is no system in the SSD, the computer may not recognize the SSD interface. We must manually To change the BIOS settings and return it to the IDE interface.

Identify USB boot items

The SSD can be recognized by the system again by modifying the IDE/AHCI interface. If your computer cannot be booted via the USB interface, you still need to Change the startup item and set it in the BIOS. On the booting system screen prompt, press “F12” to enter the startup item modification screen.

Win7 System Selection Screen and Partition

Win7 System Selection Screen

Partition Settings

If you want to make the solid state partition from the disk in the system, then you will find that the 100MB space reserved by the system in the figure is not divided. This type of partitioning is the same as the first partitioning with the relevant partitioning software. Although the 100M space reserved by the system does not have much practical significance, for the sake of security, I recommend using the partitioning method provided by the installation system. The safest way. If your hard drive itself already has a partition drive letter, you can choose to repartition, format or merge the partitions according to your wishes. And in this kind of partitioning mode, the hard disk can directly work on the 4K sector, thereby eliminating the user's concern about the partition.

After the partition work is done, we will officially enter the installation interface of the system. The author also took out the stopwatch and started the time calculation from the "file expansion" to see how long it takes for the USB flash drive to install the system method when the Win7 splash screen is generated.

It takes 9 minutes and 16 seconds

The installation time of the whole system takes about 9 minutes and 16 seconds. After making a U disk system installation tool, you can quickly and conveniently help. I or the cute sister paper installation system. Of course, if you want to talk more about it with your sister paper, you can properly pretend to have trouble and extend the installation process.