Win7 local connection shows unrecognized network without Internet access solution

Win7 system, broadband access through ADSL PPPOE, but has not been connected, in the connection process, the broadband connection in the lower right corner will turn, wait until the prompt is not connected, put the mouse to the lower right corner The icon will prompt "Internet Access - Local Connection Display Unrecognized".

Unidentified network start (if this can be skipped normally), click on the customization below to see if it is selected for public? Change to special-> Next-> Close (as shown below) ), well, wait a moment, there will be a window to choose the network situation, you can choose what family, company or something, this depends on the individual needs. (The icon can be changed at any time, the method is to customize after normal ->Change).

It will take a while for it to take effect, because the computer should automatically detect it, use this time to set the IP.

Click on the broadband and local viewing status separately, and then select their IPv6 options (as shown below). This is because of the boot speed considerations. Otherwise, it will automatically get it once and for all. The IP segment is too time-consuming. (The education network should not be closed. Other telecom Netcom users should be shut down. This technology is too far away from us.)

IPv4 The settings are as follows, IP address: 192.168.1.2 (to set this, because the machine's IP address and the following gateway on an IP segment), the subnet mask is automatically assigned 3 255 one 0, the address is: 192.168.1.1 (this is the default),

The IP of the following 2 DNS servers is changed according to the location, each province or municipality Have your own IP segment, it is recommended to use EVEREST Ultimate to view it, open it and click on the network device -> Windows network, check the network configurator address item. You can clearly see it, then fill it into the preferred and alternate DNS respectively.中.

This is almost the same, restart the computer, see if the connection is still limited connection, open IE, enter 192.168.1.1 in the address bar, press Enter, take the initiative to visit us ZTE ZXDSL831B ADSL Modem, well, all solved, perfect!

Not yet, can't say that this is perfect, after the restart, the local connection becomes restricted again, and why do we want There are 2 network settings? Why can't I have only one? The answer is of course. And it's easy to add happiness. The effect is as shown in

The method is to click on a random Customize, then click to merge and delete the network location, (as shown)

Then check ADSL broadband connection and local connection, point merge, In the next window select the broadband connection, Merge (that is, the local dial-up connection to broadband connection in the merger). This will no longer be prompted that the connection is limited.