Win7 wireless network card sharing Internet settings graphic tutorial

With the prevalence of wireless networks, today's notebooks, smart phones, tablets, etc. are still more and more wireless networks, for many family friends, generally use wireless routers Set up a wireless network to achieve multiple mobile phones in the home. There are already multiple devices for wireless sharing of Internet access in notebooks or tablets. But sometimes, if you have a laptop at home or a desktop computer with wireless Internet access, then we can buy a router without using a wireless network card. To achieve wireless network sharing, interested friends may wish to study together.

Extended reading: How to wirelessly access the desktop computer?

Second, Win7 wireless network card sharing Internet access settings are as follows:

1, first local connection settings: first open the network icon in the lower right corner of the screen (as shown below); right click select "open" Network and Sharing Center to open the Network and Sharing Center (as shown below); in the Network and Sharing Center window, find "Change Adapter Settings" (as shown below); in the newly opened window, find "Wireless Network Connections" & rdquo And right click on the properties (as shown below); in the "Wireless Network Connection Properties" window, find the "Share" tab and check "Allow other network users to connect through this computer's Internet connection". (As shown below); find click "Allow other network users to connect via this computer's Internet connection" & rdquo; below "Please select a dedicated network connection"; in the pop-up drop-down menu, select "Wired Network Connections" (As shown below); after the selection is completed, find "Use ICS (Internet Connection Sharing)" and click on the "Settings" button on the right side (as shown below); in the pop-up "Advanced Settings" window Check the corresponding item and click the “OK” button to complete the setup. (Check the results as shown below); At this point, & ldquo; wireless network connection & rdquo; is set.

2. Wireless hotspot settings: Check your laptop wireless network card to see if you have a virtual wireless network card function, run the command prompt as an administrator. At the command prompt, type the following command: netsh wlan set hostednetwork mode=allow, as shown in the command prompt, enter the following command to create the SSID name, netsh wlan set hostednetwork ssid="create the name of the wireless hotspot" The name of the wireless hotspot is “Hoc”; create a password for the wireless hotspot, enter: netsh wlan set hostednetwork key=password, as shown in the password is 8 1 and finally enter netsh wlan start hostednetwork to open the virtual wireless share and then in the “network” In the tab, find the "Internet Protocol Version 4 (TCP/IP)" project and double-click it to open it (as shown below); in the pop-up "Internet Protocol Version 4 (TCP/IP) Properties" window, change the IP address to “10.0.2.6”Subnet mask changed to “255.255.255.0” The default gateway is not filled in; fill in the IP address and continue to fill in the DNS address; for example: 202.106.46.151, the user's DNS address is connected locally by the user The obtained DNS address shall prevail (as shown in the figure below); after completing the filling, please click twice & ldquo; to confirm the configuration to take effect. After the above two steps, the Win7 part of the Win7 wireless shared wired network has been completed. 3. The client (wireless device that needs to connect to Win7) is set as follows:

1.) If the device connected to Win7 wireless shared wired network is Win XP system, please cancel “IP” before connecting to the wireless temporary network. The address is automatically obtained and the mode is changed to manually input the IP address. When the IP address is entered, if the IP address set in the wireless network connection of the Win7 system is “10.0.2.6”, the IP address of the Win XP system is set to :“10.0.2.16”;The subnet mask is set to “255.255.255.0”; The default gateway is set to “10.0.2.6”; DNS address setting should be set to “local connection with Win7 system&rdquo ; The obtained DNS address is the same. After the IP address is set, connect to the previously created wireless temporary network. 2.) If the device connected to Win7 wireless shared wired network is Android phone or Pad, please change the IP address to “Static” or “Manual” and enter the IP address as “10.0.2.28”. The subnet mask is set to “255.255.255.0”; The default gateway is set to “10.0.2.6”; The DNS address setting should be set to the same as the DNS address obtained by the Win7 system's "local connection". After the IP address is set, connect to the wireless temporary network created before.

Introduction to this place, I believe everyone has already understood how to set up wireless network sharing for Win7 wireless network card. If you have any questions, you can also contact us.

Similar reading: Win7 notebook to do wifi hotspot Win7 notebook how to be a wireless router