Transfer to create a U disk boot disk to install WIN7

This is a summary of the installation of Win7 with a USB flash drive.

Step 1: Download the Win7
iso image, I use Win7 OEM 33in1 32/64bit download Address to see this post http://www.benyouhui.com/thread-1001224-1-6.Html

The second part: the production of U disk, this part can be divided into two, one is to use cmd Knock the command to do the specific steps as follows: Run cmd, then follow the steps below to enter the command

1. diskpart

2. list disk Type the command and the system will automatically list all the computers. The discovered disk, including the U disk we just plugged in

3. select disk #(# is the number of your u disk)

4. clean

5. create Partition primary

6. select partition 1

7. active

8. format fs=fat32(will be a bit slow)

9. assign< Br>

10. exit

Turn off the command line interface, then our system u disk is finished, it is best to re-plug the u disk. Then just use whatever software as long as you can open the iso format file (I use winrar), copy the image file down to the U disk, just copy it.

Second: The software used is UltraISO. You can write the image to the USB flash drive by USB-hdd. Of course, you can also mass produce a usbcdrom with the corresponding U disk mass production tool. Not to mention the specifics. Choose with you.

The third step is to plug in the created U disk, press F1 to enter biOS----startup-----boot to adjust usb-hdd to the first place, then save and restart. The next step is like using a CD. It's very simple that you follow his prompts step by step.

The first thing after installing win7 is that the s disk can't be seen, still in it. It is estimated that the recovery of the opinion has been killed and has not been tried. Basically, the driver is fixed, but there are a few pci that are not fixed, but it does not affect the use. Basically, the ThinkPad software is not compatible with Win7. As far as I know, the battery and fingerprint can be used.

If you want to update the driver, you can use the driver life. . . .

And my computer is 2.1 so I don't need to brush biOS. It is activated directly after loading. . .

After so much, I will update it later.

There are big spiders that can't be used. I don't support Win7

I found that wireless is always dropped.