Vista/Win7 ADSL Internet access, local connection is limited? The network is not recognized? Solution

Unidentified network start (if this can be skipped normally), click on the customization below to see if it is public? Change to special-> Next-> Close (as shown below), well, wait a moment, there will be a window to choose the network situation, you can choose what family, company or something, this depends on the individual needs. (The icon can be changed at any time by customizing it after normal -> change).

Wait for it to take effect for a while, because the computer should automatically detect it, use this time to set the IP. .

First click on the broadband and local viewing status, and select their IPv6 options (as shown below). This is due to the speed of booting, or it will be automatically obtained every time you turn it on. It’s a waste of time for the IP segment that doesn’t touch the edge. (The education network should not be closed. The other telecom Netcom users should be shut down. This technology is too far away from us.)

The IPv4 settings are as follows: Figure, IP address: 192.168.1.2 (to set this, because the machine's IP address should be The following gateway is on an IP segment), the subnet mask is automatically assigned 3 255 and 0, the address is: 192.168.1.1 (this is the default),

About the IP addresses of the 2 DNS servers below It is changed according to the location. Each province or municipality has its own IP segment. It is recommended to use EVEREST Ultimate to view it, open it and click on the network device->Windows network to view the network configurator address. It can be very clear See, then fill them into the preferred and alternate DNS respectively.

This is almost the same, restart the computer and see if the connection is followed by a restricted connection, open IE, at the address Enter 192.168.1.1 in the column, press Enter, take the initiative to visit our ZTE ZXDSL831B ADSL Modem, well, have solved, perfect!

Not yet, can not say that this is perfect, after restarting local The connection has become restricted again, and why do we have 2 network settings? Why can't we have only one? The answer is of course. And it's easy to add a pleasant effect. The effect is as shown in the
method. Define, then click to merge and delete the network location, (as shown) and then check the ADSL broadband Local access and connections merge point, then select the broadband connection in the next window, merge (that is, the local dial-up connection to broadband connection in the merger). This will no longer be prompted that the connection is limited.