How to install Win7 under PE and Status: 0xc000000f solution

Everyone knows that all files in win7 have more than 2 G, and it is very troublesome to use DVD burning.

Here, I would like to tell you a good way to install WIN7 on a hard disk under PE without burning,

First, make a bootable U disk with PE function inside. (If you have a CD-ROM drive, you can use the CD with PE to enter the PE.)

Second, extract the Windows 7 CD image file you downloaded to the D drive, such as D:\\Win7. Then right click on your computer's C drive to select the format, ready to copy the file;

Third, copy the bootmgr file and the boot folder in D:\\Win7 to the root directory of the C drive; and D:\\Win7 Copy the boot.wim of the \\sources directory to the sources directory of the C drive (you need to create a sources directory yourself);

4. Start - travel - cmd into DOS, switch to C drive, run C:\\ Boot\\bootsect.exe /nt60 c: The last line after the carriage return is successful, indicating success.

At this point, take the U disk or CD-ROM drive out, restart the hard disk to start the installation state;

(If you can't execute it, you can execute it three times. The following is the code executed three times. After a line, press Enter and execute the next line.)

DOS code

c:

cd boot

bootsect.exe /nt60 c:

Five, automatically enter the Windows 7 installation interface after reboot, select the language and other preferences, click Next to enter the installation Windows interface;

Six, do not point to this time "Install now", but Click "Maintenance Computer" in the middle of the lower left corner! Then select the first item in the “System Recovery Options” <; use the reply tool that can help solve the Windows startup problem...”, then select the last one in the next “command prompt”;

7. After the DOS window pops up, we switch to the D drive and run D:\\Win7\\sources\\setup.exe to enter the normal installation.

(If you can't execute it, you can execute it four times. The following is the code for four executions. After executing one line, press Enter and execute the next line.)

DOS code

d:

cd win7

cd sources

setup.exe

VIII. Select the first partition in the partition state that comes out, ie C drive, and then click Format the bottom, then click Next to enter the normal installation state of Windows 7. Then follow the prompts to complete the installation of Win7 very easily, and the whole process is basically over.

Some people report that the first step of the execution command will prompt as follows:

Error Code

Windows Boot Manager

Windows failed to start. A Recent hardware or software change might be the

cause. To fix the problem:

1.Insert your Windows installation disc and restart your computer.

2.Choose your language Settings,and then click "Next."

3.Click "Repair your computer."

If you do not have this disc,contact your system administrator or computer

manufacturer for assistance.

Status:0xc000000f

Info:The boot selection failed because a required device is inaccessible.

In fact, as long as the copy in the third step If there are no errors in the file, there will be no such prompts, so please check the file copying error if you get this error.