0xc000000e error resolution under Windows 7

When the computer encounters a surprise event, the bootloader of Windows system will not work properly. Win7 cannot start normally and report "0xc000000e" error at the same time, encountering 0xc000000e error, we Can not enter the safe mode, the author said that the 0xc000000e error can be solved without reinstalling the system.
0xc000000e error

First set the U disk as the first boot device by modifying the BIOS, then use the U disk version of WinPE to boot the system and run the command prompt tool under WinPE system; then at the cursor position Enter the following DOS commands in sequence (press the Enter key for each DOS command):

cd c:\\windows\\system32

bcdedit /set {default} osdevice boot

bcdedit /set {default} device boot

bcdedit /set {default} detecthal 1

The meaning of these sentences: 1, switch to the "C: WindowsSystem32" directory ( c drive is the system disk)

2, set the hard disk partition where Windows7 is the default

3, set the partition where the Windows7 boot file is the default

4, from the default location Start your computer.

After completing the above operations, you can log in to Windows 7 after restarting the system. This is simpler than installing the system. If you have encountered such a startup failure during the process of using Windows 7, you can also try to use this method to solve the error of 0xc000000e.