Win8 create WIFI hotspot graphic tutorial

Win8 open wifi hotspot method:
1. Right click in the lower left corner of the desktop, select the command command (admin);
2. Enable and set the virtual WiFi network card;
Run command:
netsh Wlan set hostednetwork mode=allow ssid=cai key=12345678
This command has three parameters,
mode: whether the virtual WiFi network card is enabled, and disallow is disabled.
ssid: The name of the wireless network, preferably in English (taking cai as an example).
key: wireless network password, more than eight characters (take 12345678 as an example).
The above three parameters can be used separately,
for example, only use mode=disallow to directly disable the virtual Wifi NIC.
Figure:

After the connection is successful, there will be one more network connection for the wireless connection 2 or Wi-Fi 2 of the Microsoft Virtual WiFi Miniport Adapter. If not, just update the wireless network card driver.

3. Set up Internet Connection Sharing: In the "Network Connections" window, right-click on the network connection that is connected to the Internet, select “Properties”→“Share”, check “Allow other ······connect(N)” and select “Wi-Fi 2”.
4. Turn on the wireless network: continue to run in the command prompt: netsh wlan start hostednetwork
(change start to stop to turn off the wireless network, you need to enable this wireless network after booting up.) The command can be)

At this point, the red cross of Wi-Fi 2 disappears, the WiFi hotspot has been set up, and the host is set. Other devices with WiFi module will be able to search for wireless networks cai, enter the password 12345678, will be able to share the Internet it!


virtual wireless AP is transmitted WLAN 802.11g standard, the bandwidth is 54Mbps.