Happily installed Win8, has been very cool; last night was hot, want to try Kaspersky 2013, but forgot to uninstall 360 guards and close Windows defender, the results did not take long A thing that everyone likes to see: blue screen. The first reaction when restarting is to enter safe mode, temporarily uninstall 360 and close the Windows defender. As a result, F8 has all his fingers hurt and has not entered safe mode.
So I spent a long time on the Internet, and found some ways to enter Windows 8 like safe mode. The result is quite a lot of stuff, RTM is useless.
The following useful sharing is as follows, and given Explanation:
First, by setting "System Configuration" to restart into safe mode
This requirement can enter the system, can open the control panel, or start the screen, or run the command. The following only introduces the method of entering the system configuration by running the command (the easiest and quickest):
Click the Windows Start+R button at the same time, the run command box will pop up, enter “lds;msconfig” in the box and press Enter (without double quotes) The meaning of this is Microsoft (ms, Microsoft, Microsoft's abbreviation) configuration (config). As shown in the figure:
Select the boot tab page in the pop-up system configuration, start to the normal security mode, just need to set as shown below:
Click OK, prompt to restart, restart After that, it will automatically enter safe mode.
Among the other options, the other shell refers to the safe mode with reboot to the command prompt. The network refers to the safe mode of rebooting to the network connection. Others are basically not used here, so I won't say it.
Note: If you don't understand it, don't change it at will, otherwise you may have incomplete function or even turn on the blue screen.
Second, the way to restart from the metro interface into the safe mode
This and the above is actually a change of soup. Here are the steps:
Select the settings on the charm toolbar that pops up when the mouse moves to the lower right corner, select Change PC settings in the lower right corner of the popup bar; select Immediately in the Advanced Startup at the bottom of the General tab of the PC Settings app. Restart; you can also press the restart button to enter the advanced startup while holding down the shift key.
In the advanced startup, select the advanced option, and enter the boot settings in Windows, and then restart is the security mode of Windows 8.
Third, add a Windows 8 security mode startup items
The idea of this method is to create a new boot project that is the same as the current system, and set this project to boot only to a certain security mode. The advantage of this is that you can press F8 at boot time, select the operating system, and be able to enter safe mode when the system fails to boot. Let's take a look at the security mode similar to the default security mode of the old system. Let's take a look at it:
1. Find the boot identifier of the current system
Right-click in the lower left corner and select "ldquo" from the pop-up menu. Command prompt (administrator) (A) & rdquo;. In the command line window that pops up, type “bcdedit /enum /v” (without double quotes) and press Enter. This means to view the boot information of the current system. FIG following steps:
2, a new system boot program in the
a command input window (bcdedit /copy {①} /d " {②} (Safe Mode )") (without parentheses). This means adding a boot project with the same boot ID as the system boot ID and naming it "Windows 8 (safe mode)" (without quotes, and safe mode can be replaced with input to the command line window) Any text, but it is recommended to use English words with fewer characters to avoid problems). As shown below:
3, set the new boot project to boot only to Windows 8 safe mode
In the system configuration window, set as shown below:
If you need to boot to other Safe mode, you can choose other options in the safe boot. It is best to check all the boot settings to permanent settings, otherwise it will be restored after reboot. The timeout is set according to your needs. This is the time when the user chooses to start the project.
After the setting is successful, the direct startup will be in the front of the lock screen interface after the Windows logo. On this interface, select Windows 8 (safe mode) to restart to safe mode. This interface supports touch screen. The interface is as follows:
If you need to boot directly to Windows 8 security mode, you need to press F8 in front of the Windows logo after the BIOS interface. Of course, you can press F8. The interface that appears is similar to the above picture, but the resolution seems to be only 800*600, and the touch screen should also be supported. In addition, select Windows 8, will directly boot to Windows 8.
Security Mode Introduction:
Security mode is a special mode in the Windows operating system, friends who often use the computer will certainly not feel strange, in safe mode Users can easily fix some errors in the system and get twice the result with half the effort. The safe mode works by starting the computer without loading third-party device drivers, allowing the computer to run in the system's minimum mode, which is convenient for users to detect and repair computer system errors.