Install the Win8 operating system with the native USB3.0 function of the B75 motherboard.

When it comes to USB3.0, there are two ways to support USB3.0 on the motherboard. One is the onboard third-party support for USB3.0 chipset, and the other is the motherboard main chipset native support for USB3.0. Features. For example, Intel's seven-series chipsets natively support USB 3.0 functionality. Some H61 motherboards also support USB 3.0 features, and those are motherboards with a third-party USB 3.0 chipset. So how fast is the native USB3.0, the following uses the native USB3.0 function of the B75 motherboard to install the Win8 operating system. Look how long it takes?! The so-called U disk installation method: refers to the installation of the installation image into the U disk, through the U disk to simulate the optical drive to install the system, the advantage is convenient, the speed depends on the U disk. However, you need to make a U disk system. The tutorial on this topic can be easily found online, we will not give a detailed introduction here.

Screenshot platform hardware configuration: Processor Intel Core i5-3330 @ 3.00GHz quad-core motherboard Colorful Tomahawk C.B75K V21 U disk Eaget F30 (16GB, interface type: USB2.0, USB3 .0) Graphics Intel HD Graphic 2500

The USB3.0 hard drive uses the Yijie F30. Below we witness the whole process of installing Win8 system under the native USB3.0 interface.

because there is no timer, the timer function on the mobile phone to start timing, and a first boot sequence from startup disk yijie F30 USB3.0 U motherboard BIOS which, while the disk is inserted in the U On the motherboard's USB3.0 interface.

U disk into the inside of the PE system, run GHOST software, use software to copy GHOST U disk inside WIN8 system to the hard disk.

Windows8 installation process can be divided into two portions, i.e., portion and a mounting portion to copy files, copy files U disk USB3.0 interface portion takes a total of about 3 It takes 53 seconds.

GHOST After completion, the need to restart the computer, the installation process below shows:

Windows8 exemplary use

how to complete the entire installation using 8 minutes after 02 seconds

installed and found that all hardware is working properly, USB, SATA, what are not installed drives. The U disk installation completed successfully, which took a total of 8 minutes and 02 seconds, of which 3 minutes and 53 seconds were spent on copying files.

ax C.B75K V21 native support USB3.0, so no additional load the driver manually through the entire installation process, the user can be said to greatly facilitate the installation. It took only 8 minutes and 02 seconds to spend time, almost the time to listen to a song. This method is also suitable for installation of other systems, including Windows 7 systems. A friend who is ready to install the system may wish to give it a try. Also look at what changes the WIN8 system has brought us.