Win8 wireless network card search can not find the signal solution

pre-installed Win8 Chinese version system, wireless device driver is normal, but can not find the signal. Flight mode is confirmed to be off. As shown in the figure below: Analysis reason: The control of the wireless network card is newly added in the Win8 system settings, and it needs to be enabled to connect to the wireless network. Solution: 1. Open the charms and select “Settings”. You can use the mouse to move to the top right corner of the screen to open the charms, or you can quickly open it by pressing the keyboard “windows logo key"+“C”; 2. Click “More Computer Settings>---&ldquo "Wireless" menu; 3. Click "Wireless Settings" to turn on the wireless function; 4. After the setting is completed, the network list can be found to search for wireless signals; if the network list displays the following information, please check the wireless management. Whether the service (WLAN AutoConfig (WlanSvc) service) is started; WLAN AutoConfig service viewing method: Right-click in the blank space of the taskbar to select “Task Manager>; If it is displayed as the simple information mode as shown below, click “Details ”; Click the <quo;Services" tab, find the WlanSvc (WLAN AutoConfig) service, check if the "Status" column is displayed "Running"; If the display is "ldquo; Stopped", right Click on this service to select “Start”. This method can start this service, but if the service is disabled or manually started, the service will not start automatically after restarting the computer. If you need this service to start automatically, you can click ““Open Service” to enter the service management interface, and modify it to start automatically. Three levels of setup are required to enable wireless Internet access: physical switches, software switches, and wireless services. The wireless light will only illuminate when the switch is turned on. When the indicator light is on but the wireless network signal cannot be searched, check if the wireless service is not turned on. Operation steps: 1. Open the service management interface. You can open it in three ways: (1) right click on the desktop computer icon, select “Manage”, click “services & applications", click “service"; (2) simultaneously press the Windows logo button ( Press the button on the keyboard and the R button to open the running interface, enter services, and click OK; as shown below: (3) Press the CTRL, Shift and ESC buttons simultaneously to open the task manager and click on the “Services” option. Card; 2. Find the WLAN AutoConfig (WlanSvc) service. If it is manual or disabled, right click on this service and select “Enable” (the task manager service displays “Start””. If you want this service to run automatically after booting, right-click on the service and select "Properties", select the startup type as "Automatic", then click "Apply", click “Enable”, click “ The OK & rdquo; button closes the settings window. This will restart the computer and the service will run automatically. The setup steps can be seen in the following figure: