Nowadays, wireless routers are used in almost all home broadband installations. Even if the home is a desktop computer, wireless routing will be preferred. Because notebooks, tablets, and mobile phones are almost inseparable from WIFI, for ordinary routing, you can basically follow the setup wizard. Win8e 800 million network here briefly explains the knowledge of setting up wireless routing. To set up a wireless router, performing four main steps:
1. Get the appropriate hardware requires the following hardware
to set up a wireless network and connect to the Internet:
A wireless router.
computer with a wireless network adapter.
a computer with a wired network adapter. (Provided only in a wired network adapter used in the process, and may belong to a computer with a wireless network adapter.)
a network (Ethernet) cable.
2. Set the router
If the Windows logo appears on the router or "CompatiblewithWindows" words can be in Windows8, using the latest version of WindowsConnectNow (WCN) on WindowsRT, Windows7 or WindowsVistaServicePack2 to automatically set The router.
automatically set the router. 1). Unpack router and it is plugged in. Since WCN is used, there is no need to physically connect the router to your computer. .
2) connected to the network in the following ways: swipe from the right edge to the middle of the screen, click on the "Settings" (if using a mouse, pointing to the upper right corner of the screen, then the pointer is moved downward, and then Click "Settings"), then click or click the network icon. Tap or click the network you want to connect to, and then tap or click Connect.
3). Tap or click the router's default network, the network can be identified in accordance with the manufacturer's name.
4). Tap or click the network you want to connect, click or click the "Connect", then follow the instructions on the screen.
Note: WCN when setting up the router security is enabled. You can change the security settings later.
if not using WCN, most routers are set with CD to help you set up your own wireless network. Check the information that came with your router.
If you can not use WCN, there is no setup CD, you can set up the router manually.
manually set the router. 1). Unpack router and it is plugged in. Any
2). The end of the network cable connected to the wired network adapter to the computer, and the other end is inserted into any port on the wireless LAN router (not marked with the "Internet", "WAN" or "uplink" in port). Port
the back of the router
3). Open your Web browser and enter the address of the router configuration pages. For most routers, the configuration web page address is
http://192.168.0.1
or http://192.168.1.1
.
on the configuration page, and password to use the router user name contained in the document. If you can't find your username and password, but you can connect to the Internet from another computer, you can search the router manufacturer's website on the Internet for more information.
4). By reference to the information included with the router to configure the following settings.
select the name of your wireless network.
select the type of security encryption (WPA, WPA2 or WEP) you want to use and enable the type.
recommended to use WPA2. WEP is not recommended. WPA and WPA2 are more secure. If you are trying to use WPA or WPA2, but they don't work, it is recommended to upgrade your network adapter to a WPA or WPA2-compatible adapter.
choice for connecting to the security key or passphrase wireless network.
Change the default administrative password of the router to a new password so that other people will not be able to connect to your network up.
3. Connect the router to the Internet
connect the router to the Internet can provide Internet connections for each person on your network. These steps may vary depending on the device you are using.
connected to a device (a combination modem and the router) inserted
combination modem and router
. 1). The device power cord into a power outlet.
2). The end of a telephone line or a cable into the wide area network device (WAN) port, and the other end into the wall jack. (DSL users: Do not use the telephone line DSL filter.)
3) the end of the network cable to the LAN port on the device, and the other end into the computer's network port. (Win8e.com eight hundred million net to remind If you are using a wireless connection, skip this step.)
4). Start (or restart) the computer.
connect the two devices (a separate modem and router)
inserted modem and router
. 1). The modem's power cord to the jack.
2). The end of a telephone line or cable modem insertion, and the other end into the wall jack. (DSL users: Do not use the telephone line DSL filter).
3) the end of the network cable into the modem, the other end into a wide area network router (WAN) port.
4). The router into the power supply.
5). The end of the network cable to the LAN port on the router, the other end into the network port to be connected to a computer on the Internet. (If you are using a wireless connection, skip this step.)
6). Start (or restart) the computer. 4.
the computer can be connected to a network using a wired connection
permanently connect your computer to the original router, or switch to a wireless connection. Here's how to connect other computers to your network.
the other computers connected to your network
1). Log on to the computer you want to connect to the network. .
2) connected to the network in the following ways: swipe from the right edge to the middle of the screen, click on the "Settings" (if using a mouse, pointing to the upper right corner of the screen, then the pointer is moved downward, and then Click "Settings"), then click or click the network icon. Tap or click the network you want to connect to, and then tap or click Connect.
3). Select your wireless network from the list that appears, then click or click "Connect." .
4) one of the following:
If your router supports Windows Connect Now (WCN), or Wi-Fi Protected Setup (WPS), and there is a button on the router, Press the button and wait a moment, the router will automatically add the computer to the network. In this case, you do not need to enter a security key or passphrase.
prompted, enter the security key or passphrase, then click or click "OK."