What should I do if the Win8.1 system cannot save after modifying the IP address?

Dynamic IP can be set in Win8.1 system, or static IP can be set. It turns out that dynamic IP can also be modified into static IP, but some users can't save dynamic IP when it is changed to static IP. Or is it still a dynamic IP after saving, what should I do at this time?

Steps:

1. First check if the NIC driver is normal. If the NIC is not available, the NIC driver may not be normal. You can reinstall the NIC driver.

2. NIC driver everything is normal, it is recommended to use the following method: WIN + X key combination, locate and open the device Manager;

3, after opening locate the following options;

4, find the network adapter a, a wired adapter;

5, open the network properties click to install --- agreement, click Add --- disk, browse to C: /Windows /inf /nettcpip. Inf ok, then select TCP/IPv4 installation;

6. If the problem persists, please press “Windows+X”Open the command prompt (admin), enter “netsh int ip reset” Enter. Follow the prompts to restart your computer to resolve the issue.

The above is all the contents of the Win8.1 system to modify the IP address can not be saved, so that you can change the dynamic IP to static IP.