What should I do if I get a repair disk error on Win8.1?

A netizen's HP Win8.1 notebook has been accidentally dropped. After booting, there is a page that is repairing the disk error and it is expected to take more than an hour. carry out. This is how to solve it?

Solution

1, first of all, if it is WIN8 prompted to repair the disk, you can back up data to try to repair later. If you are installing a third-party software to repair the disk, it is recommended not to use it. The notebook has not been tested before leaving the factory, and its stability and accuracy cannot be guaranteed.

2, Secondly, if you are already repairing the disk, it is recommended to wait patiently for the test results. In addition, it is recommended that you can enter the BIOS to check the hard disk after the repair to determine whether the hard disk is faulty. ("Win8 system enters the BIOS setup detailed steps")

Detection method: Enter the BIOS, select Diagnostics, run Hard Drive Self Test (or HDD Self-Test Options) to detect the hard disk. The whole process takes about 30 to 60 minutes. Simultaneously connect the battery and the power adapter to supply power during the test. (The notebook models are different, the specific steps for detecting the hard disk in the BIOS are not exactly the same.)

Detection result:

(1) If the hard disk detection process is not reported, the result is all passed, then your The hard drive should be fine.

(2) If the screen reports an error, such as ERROR or FAIL, indicating that there is a problem with the hard disk, then the notebook will be sent to the nearest HP service center for processing.

You should really pay attention to the fact that the traditional mechanical hard disk is not resistant to falling. It is very likely that a disk will cause a disk error. You can use the solid state hard disk to avoid this problem.