How to configure wireless network under Windows 8

How to use Windows to configure wireless network system

1, first open the wireless LAN switch your notebook, Lenovo notebook can be opened by most shortcut FN + F5 (or F4).

2, click the bottom right corner of the task bar & ldquo; network & rdquo; icon in the right-hand column will be listed in the search to the wireless network list, select the wireless SSID name you want to connect, click Connect;

3. If the wireless network has turned off the broadcast function, it does not appear in the wireless network list on the right sidebar. You can choose to add the wireless network manually. In & ldquo; network connection or set & rdquo; select & ldquo; manually wireless network connected to the information input & rdquo ;, you want to add a wireless network, as shown in FIG:

4, if you are using wireless network DHCP to assign IP, Windows 8 will be automatically obtained from the router assigned IP, connected to the network. If you need to specify the TCP/IP parameters to manually set a fixed IP address, you need to click the Change Adapter Settings on the left to manually enter the specified IP address information.

How ThinkPad models use Access Connections to configure wireless networks

1. Enable wireless network card: first confirm that the wireless network card driver has been properly installed and turn on the wireless network card antenna switch. Most of Lenovo notebooks are open with FN+F5 (or F4), as shown:

2. Click “Start”---“All Programs ---“ThinkVantage”- --“AccessConnections”---“Looking for wifi” to find wireless networks;

3, this time will open "look for wireless network" window, if there are wireless networks in the area that can be found If you can, you can see it in this window.

4. After selecting the wireless network to connect to, click with the left mouse button and click “Connect” in the lower right corner. Generally, if the wireless network to be connected is encrypted, a configuration prompt will pop up, as shown in the figure. Click ““Yes”;

5, in the “Edit Location Profile” window. In the Wireless Settings tab, select the type of encryption for the wireless network you want to connect to.

6. After selecting the encryption type, click on “Attributes”. in the encryption settings, we have to select a specific encryption parameters, and set passwords; (choice here is to correspond to the wireless network you need to connect and configure the encryption type of wireless network if you do not know to be connected and For the password, please contact the person who manages the wireless network.)

7. If you want to automatically connect to the wireless network every time you turn it on, check the box below and click OK. can.

8. After returning to the Edit Location Summary window, click OK. (If you don't automatically get an IP address, but also set a more advanced option such as a fixed IP address, click on the "Other Settings" tab to set it up)

9. AccessConnections starts to connect to the wireless network < Br>

10. After the connection is successful, you are prompted to save the profile, please click “yes".

11, in general, you can go online at this time.