How to implement shared Internet access under Windows 8

Share Internet access by sharing local connection (wired, wireless)

Description: Confirm that the computer sharing the local connection is the gateway computer has two network cards (one of which is wired Or a wireless network card), and there are network devices such as switches or hubs, and the computer and the computer are connected through a network device or a wireless local area network.

First, configure the gateway computer

1, open the properties of one of the network connections, you must ensure that this network connection can be connected to the Internet. The following takes a local connection as an example, as shown below:

2. Click the "Share” tab, and then select “Allow other network users to connect via this computer's Internet connection> checkbox, Click OK to exit.

Note: If there is only one NIC, the "Share” tab will not be available.

3, after setting the local connection is completed, the sharing flag will appear on the local connection icon, as shown below:

4. After the local connection setting is completed, another network card (wired, wireless) IP The address has been manually and automatically specified by the system, as shown below:

Second, configure the client computer

1, open the network connection properties of the client computer, as shown below:

2 Double-click "Internet Protocol (TCP/IP)" in the above figure to open the Internet Protocol (TCP/IP) Properties window, select “Automatically Obtain IP Address> Click “OK Exit.

At this point, the client settings are complete and you can share the Internet.