Win8 wireless network card search can not find the signal solution

Pre-installed Win8 Chinese version system, the wireless device driver is normal, but the signal is not searchable. Flight mode is confirmed to be off. As shown below:

Analysis reason: The control of the wireless network card is newly added in the Win8 system settings, and it needs to be enabled to connect to the wireless network.

Solution:

1. Open the charms and select “Settings”. You can use the mouse to move to the top right corner of the screen to open the charms, or you can quickly open it by pressing the keyboard “windows logo key"+“C” keys;

2. Click “More Computer Settings ”---“Wireless"Menu;

3. Click the <quo;Wireless Settings" small slider to turn on the wireless function;

4. After the setup is complete, discover the network list. You can search for wireless signals;

If the network list displays the following information, please check if the wireless management service (WLAN AutoConfig (WlanSvc) service) is enabled;

WLAN AutoConfig service view method:

Right-click in the blank space of the taskbar to select “Task Manager>;

If the message mode is as shown below, click “Details”;

Click on the “Services” tab to find the WlanSvc (WLAN AutoConfig) service and see if the “Status” column is displayed. “Running”;

If the display is “ & rdquo;, right click on this service selection “ Beginning & rdquo ;.

This method can start this service, but if the service is disabled or manually started, the service will not start automatically after restarting the computer. If you need this service to start automatically, you can click ““Open Service” to enter the service management interface, and modify it to start automatically.

Three levels of setup are required to enable wireless Internet access: physical switches, software switches, and wireless services. The wireless light will only illuminate when the switch is turned on. When the indicator light is on but the wireless network signal cannot be searched, check if the wireless service is not turned on.

Operation steps:

1. Open the service management interface.

You can open

in three ways. (1) Right click on the desktop computer icon, select “Manage”, click “Services & Applications", click “Services&rdquo ;;

(2) Press the Windows logo key (the

flag button on the keyboard) and the R key at the same time to open the running interface, enter services, and click OK; as shown below:

(3) Press CTRL, Shift and ESC at the same time to open the task manager, click on the “Services” tab;

2. Find the WLAN AutoConfig (WlanSvc) service, if yes Manually or disabled, right-click on this service and select “Enable” (the task manager service shows “Start””.

If you want this service to run automatically after booting, right-click on the service and select "Properties", select the startup type as "Automatic", then click “Apply", click “ ”, click the “OK” button to close the settings window. This will restart the computer and the service will run automatically.

The setup steps can be found in the following figure: