How to automatically connect ADSL

It is very troublesome to repeatedly dial the network connection every time it is turned on; therefore, sharing a small trick to enable the computer to automatically connect to the network after booting.

Operation steps:

1. Under Metro or traditional desktop, press the keyboard's “Win+X” combination hotkey to bring up the shortcut menu and click with the left mouse button. Management (G) & rdquo;. As shown in the following figure:

2. In the pop-up computer management window, use the left mouse button to click on the left side of the "Task Scheduler" to make it selected, then click the right mouse button to pop up the menu. And select “Create Basic Tasks (B) …”. As shown in the following figure:

3. In the Create Basic Task Wizard dialog box that pops up, type the task name such as ADSL Auto Dial and then click Mark “2” "Next (N)>” button. As shown in the following figure:

4. In the task trigger setting interface, select the following icon Note “1” at the current user login (L)”, then click on the label “2” At the "Next (N)>” button. As shown in the following figure:

5. In the operation setting interface, select the icon below (“1” at the startup program (T)”, then click on the label “2” Next (N)>” button. As shown in the following figure:

6. In the startup program or script setting interface, type “lddial ADSL [email protected] CNWHTHJK” at the location of the label “1”, and then mark ““2” Click the “Next (N)>” button. As shown in the following figure:

Note: ADSL is the name of the dial-up connection that has been created, which is not affected by the case. The specific needs to be modified according to the actual situation. The following is followed by the account number and password, separated by spaces, but the account number and password must be entered in strict accordance with the case

7. In the pop-up reminder dialog box, click ““Yes” (Y)&rdquo ; button. As shown in the following figure:

8. After completing the setting interface, check the following icon Note “1” When you click “Complete", open the dialog box for this task property. ”, then click on the "Complete(F)” button at the "2” As shown in the following figure:

9. In the pop-up property setting window, click the “Conditions” tab and uncheck “Only when the computer is using AC power (P)&rdquo ;, finally click the "OK" button to end the settings. As shown in the following figure:

10. When the setting is completed, the system will automatically dial each time you restart the computer, but only if the network cable, modem and telephone line are connected.

Remarks:

The above mentioned broadband connection name (eg ADSL) must match the name of the location shown below, as shown in the following figure: